Denon AVR 1907 Owners Manual - English - Page 42

ENGLISH Advanced Operation Multi zone music entertainment system • When the outputs of the ZONE2 OUT terminals are wired and connected to integrated amplifiers installed in other rooms, different sources can be played in rooms other than the MAIN ZONE in which this unit and the playback devices are installed. (Refer to ZONE2 of the diagram the right.) • ZONE2 speaker out and pre-out can be used when "ZONE2" is selected at "Power Amp Assignment" in the "System Setup" menu. In this case, surround back speaker out cannot be used for MAIN ZONE. • When a sold separately room-to-room remote control unit (DENON RC-616, 617 or 618) is wired and connected between the MAIN ZONE and ZONE2, the remote-controllable devices in the MAIN ZONE can be controlled from ZONE2 using the remote control unit. ¢ When using the SURR.BACK/ZONE2 amplifier as the SURROUND BACK • 7.1-channel playback using the surround back speaker is possible in the MAIN ZONE. • To use the ZONE2 line output, turn on ZONE2. • The ZONE2 OUT terminal's output level cannot be adjusted with the remote control unit. [System configuration and connections example] Using external amplifier. MAIN ZONE 7.1-channel systems Monitor FL C FR Advanced Operation ZONE2 • For the AUDIO outputs, use high quality pin-plug cables and wire in such a way that there is no humming or noise. • For instructions on installation and operation of separately sold devices, refer to the devices' operating instructions. • When the main unit is set to the recording output mode, ZONE2 remote control button cannot be operated. DVD player B Input SL AVR-1907 SW ZONE2 Audio out (Fixed out) SR B Premain amplifier or Power amplifier RC-617 RC-616 SBL SBR System remote control unit (RC-1046) Programmable remote control unit : Room-to-room remote control system (separately sold) control line : Multi source audio signal cable Refer to "Connections" ( page 19). 39 ENGLISH