Denon AVR-1912 Specification Sheet - Page 2

State-of-the-art Denon Solutions for Maximizing Content Quality • Fully discrete, identical quality and power for all 7 channels (90 W x 7ch) To faithfully reproduce the original surround sound, each of the AVR-1912's 7 channels is equipped with the same power amp of equal power. Since these power amps also use discrete circuits configured with parts strictly selected for their contribution to high sound quality, rather than with low-cost integrated circuits (ICs), the surround sound playback is of impeccably high quality. • Featuring 3D pass-through technology By connecting a 3D-compliant Blu-ray disc player and 3D-compliant TV to the AVR-1912, you will have a 3D home theater where you can enjoy high-definition sound and video on a level you've never experienced before. • High-definition audio support The AVR-1912 has a decoder that supports Dolby TrueHD, the audio format of Blu-ray disc players, and DTS-HD Master Audio, another high-grade digital audio format. • Dolby Pro Logic IIz To let you enjoy an even richer spatial expression, the AVR-1912 is equipped with a Dolby Pro Logic IIz processor. By connecting Front Height speakers and using Dolby Pro Logic IIz playback, you will be able to enjoy surround sound in the vertical as well as horizontal direction. • Minimum Signal Path for clear audio and video signal The "simple and straight" design concept has been thoroughly implemented in the signal paths to contribute to immaculately clean audio and video playback. Signal paths are as short as possible to keep signal degradation in the audio and video circuitry to an absolute minimum Main Specifications Power amplifier section Rated output *THD figures are power amp stage values. Front L/R 90 W + 90 W (8 ohms, 20 Hz - 20 kHz, THD 0.08 %) 125 W + 125 W (6 ohms, 1 kHz, THD 0.7%) Center 90 W (8 ohms, 20 Hz - 20 kHz, THD 0.08 %) 125 W (6 ohms, 1 kHz, THD 0.7%) Surround L/R 90 W + 90 W (8 ohms, 20 Hz - 20 kHz, THD 0.08 %) 125 W + 125 W (6 ohms, 1 kHz, THD 0.7%) Surround Back L/R 90 W + 90 W (8 ohms, 20 Hz - 20 kHz, THD 0.08 %) 125 W + 125 W (6 ohms, 1 kHz, THD 0.7%) • Direct Mechanical Ground Construction, embodying concepts for thorough vibration resistance Vibration-resistant construction has been reviewed to thoroughly suppress the adverse influences of vibration on sound quality. The power transformers, a source of vibration, have been securely mounted on the highly rigid bottom chassis. Direct mounting of feet to the radiator in near proximity to each other serves to suppress mutual vibration with the power transformers and other sources of vibration. • Compressed Audio Restorer to enhance digital music files Connectivity & Future-ready Expandability • Supports AirPlay • Internet Radio and network audio / photo streaming via Ethernet When connected to a network, the AVR-1912 can play audio files and still images such as photographs that are stored on your computer. You can also listen to internet radio and a host of other online music sources that use network technology. The AVR-1912 also supports AirPlay that lets you stream your music library from an iPhone, iPad, iPod touch, or iTunes. • Supports HDMI (V.1.4a with 3D, Audio Return Channel) Deep Color, "x.v.Color", Auto Lipsync and HDMI control function • Direct play for iPod and iPhone via USB You can also listen to music files from your iPod by simply connecting it to the AVR-1912's USB port with the USB cable that came with the iPod. To start play, just press the iPod Play button on the AVR-1912 or its remote control unit. Digital signals from the iPod are transmitted as is to the AVR-1912 where they pass through the compressed audio restorer and are processed by advanced audio circuitry to produce a clean, high-quality sound. Preamplifier section Input sensitivity/impedance 200 mV / 47 kohms Frequency response 10 Hz ~100 kHz - +1,-3 dB (DIRECT mode) S/N Ratio 100 dB (IHF-A weighted, DIRECT mode) FM section Tuning frequency range 87.5 - 107.9 MHz AM section Tuning frequency range 520 - 1710 kHz General Power supply Power consumption Dimensions (W x H x D) Weight AC 120 V, 60 Hz 460 W (Standby 0.1 W, CEC standby 3 W) 17-1/8" x 6-3/8" x 15-3/64" 434 x 162 x 382 mm 22 lbs 7.8 oz, 10.2 kg •Power Amp Assign function, for versatility in using the AVR-1912 for different purposes The AVR-1912 supports up to 7.1 channels (FL/ FR/ C/ SL/ SR/ SBL/ SBR/ SW) for surround playback defined by the Blu-ray disc format. To enjoy surround playback with the AVR-1912's Dolby Pro Logic IIz, you can reassign the power amp from the two surround back channels (SBL/SBR) to the two front height channels (FHL/FHR). Or by assigning the SBL/SBR power amp to Zone 2, you can enjoy multi-room audio playback, or to achieve higher-quality sound for 2-channel stereo playback, you can configure the AVR-1912 for front bi-amp operation. These are just some of the ways you can arrange the AVR-1912's amps to suit various listening styles. Ease-of-use • Setup Wizard, providing easy-to-follow setup instructions First select the language when prompted. Then simply follow the instructions displayed on the TV screen to set up the speakers, network, and so on. • Easy operation, Graphical User Interface • GUI overlay on HD Source • Pre memory remote control handset with Glow-Key • Remote Setup Guidance • Auto surround mode • Sleep timer function • Audio Delay function (0 to 200 msec) • Muting level settings (Full/-40dB/-20dB) • Audio level memory, capable of correcting dif- ferent signal levels for each input device • Variable subwoofer crossover switching *1) Requires contract with Internet service provider Ports In HDMI x 6 Component x 1 S-Video x 1 Composite (video) (included front 1) x 3 Analog Audio (included front 1) x 6 Digital Optical x 1 Digital Coaxial x 1 Out HDMI Monitor x 1 Composite Monitor 
 x 1 Audio Preout (SW)
 x 1 Phones x 1 Other Ethernet x 1 USB port x 1 Microphone Port x 1 Dock Control Port x 1 FM Tuner Antenna x 1 AM Tuner Antenna x 1 Denon Electronics (USA), LLC. 100 Corporate Drive, Mahwah, New Jersey 07430 USA TEL: 201-762-6500 usa.denon.com *Design and specifications are subject to change without notice. *"Dolby", "Pro Logic" and the double-D symbol are trademarks of Dolby Laboratories. *DTS is a registered trademark and the DTS logos, Symbol, DTS-HD and DTS-HD Master Audio are trademarks of DTS, Inc. *HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. *Windows Media and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. *NSV is a registered trademark of Analog Devices, Inc. *Audyssey MultEQ® is a registered trademark of Audyssey Laboratories. Audyssey Dynamic EQ® is a trademark of Audyssey Laboratories. Audyssey Dynamic Volume® is a trademark of Audyssey Laboratories. *"Made for iPod," "Made for iPhone," and mean that an electronic accessory has been designed to connect specifically to iPod, or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory . *AirPlay, the AirPlay logo, iPhone, iPod, iPod classic, iPod nano,iPod shuffle, iPod touch and iTunes are trademarks of Apple Inc., registered in the U.S. and other countries. D&M Holdings Inc. 18100111 A D&M Building, 2-1 Nisshin-cho, Kawasaki-ku, Kawasaki-shi, Kanagawa, 210-8569, Japan www.denon.com