Denon AVR-2112CI Specification Sheet - Page 2

Additional Features • Featuring 3D pass-through technology Connecting a 3D-compliant Blu-ray disc player and 3D-compliant TV to the AVR-2112CI creates a 3D home theater where you can enjoy high-definition sound and video like never before. • Minimum Signal Path for clear audio and video signal Denon's "simple and straight" design concept has been thoroughly implemented in the signal paths to provide incredibly clean audio and video playback. Signal paths are as short as possible to keep signal degradation in the audio and video circuitry to an absolute minimum. • Direct Mechanical Ground Construction for thorough vibration resistance Vibration-resistant construction thoroughly suppresses the adverse influences of vibration on sound quality. Power transformers have been securely mounted on the receiver's highly rigid bottom chassis to minimize vibration. By direct mounting feet to the radiator in close proximity to each other, we are able to suppress the mutual vibration from the power transformers and other sources. • Compressed Audio Restorer for enhancing digital music files Denon's audio technology for MP3, WMA and AAC compressed formats restores the higher frequency range that is lost during the compression process. This technology delivers superior performance with more emotional range and nuances from any connected source that uses compression. Connectivity & Expandability • 2 source / 2 zone output The AVR-2112CI lets you enjoy a program source in the Main Zone (the room where the AVR-2112CI is located) and in Zone 2 (another room). The source can be the same for both zones, or you can enjoy 2 different sources in those zones if you prefer. The Denon Remote App controls all the zones from anywhere in the home making multi-room audio so much easier to enjoy. Custom Features • Universal remote control with Glow-Key • Auto surround mode • Sleep timer function • Audio Delay function (0 to 200 msec) • Muting level settings (Full/-40dB/-20dB) • Audio level memory, capable of correcting different signal levels for each input device • Variable subwoofer crossover switching *1) Requires Broadband Internet Service Main Specifications Power amplifier section Rated output *THD figures are power amp stage values. Front L/R 90 W + 90 W (8 ohms, 20 Hz - 20 kHz, THD 0.08 %) 125 W + 125 W (6 ohms, 1 kHz, THD 0.7%) Center 90 W (8 ohms, 20 Hz - 20 kHz, THD 0.08 %) 125 W (6 ohms, 1 kHz, THD 0.7%) Surround L/R 90 W + 90 W (8 ohms, 20 Hz - 20 kHz, THD 0.08 %) 125 W + 125 W (6 ohms, 1 kHz, THD 0.7%) Surround Back L/R 90 W + 90 W (8 ohms, 20 Hz - 20 kHz, THD 0.08 %) 125 W + 125 W (6 ohms, 1 kHz, THD 0.7%) Our Integration Partners: Preamplifier section Input sensitivity/impedance 200 mV / 47 kohms Frequency response 10 Hz ~ 100 kHz - +1, -3 dB (DIRECT mode) S/N Ratio 100 dB (IHF-A weighted, DIRECT mode) FM section Tuning frequency range 87.5 - 107.9 MHz AM section Tuning frequency range 520 - 1710 kHz General Power supply Power consumption Dimensions (W x H x D) Weight AC 120 V, 60 Hz 460 W (Standby 0.1 W, CEC standby 3 W) 17-1/8" x 6 37/64" x 15-3/64" 434 x 167 x 382 mm 22 lbs 11.3 oz, 10.3 kg Ports In Out Other HDMI Component S-Video Composite (video) (included front 1) Analog Audio (included front 1) Digital Optical Digital Coaxial HDMI Monitor Composite Monitor 
 Audio Preout (SW)
 Audio Preout (L/R)
 Phones Ethernet USB port Microphone Port Dock Control Port FM Tuner Antenna AM Tuner Antenna Remote Control In/Out RC232C x 6 x 1 x 1 x 3 x 6 x 1 x 1 x 1 x 1 x 1 x 1 x 1 x 1 x 1 x 1 x 1 x 1 x 1 In 1 / Out 1 x 1 *Design and specifications are subject to change without notice. *"Dolby", "Pro Logic" and the double-D symbol are trademarks of Dolby Laboratories. *DTS is a registered trademark and the DTS logos, Symbol, DTS-HD and DTS-HD Master Audio are trademarks of DTS, Inc. *HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. *Windows Media and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. *NSV is a registered trademark of Analog Devices, Inc. *Audyssey MultEQ XT® is a registered trademark of Audyssey Laboratories. *Audyssey Dynamic EQ® is a trademark of Audyssey Laboratories. *Audyssey Dynamic Volume® is a trademark of Audyssey Laboratories. *"Made for iPod," "Made for iPhone," and mean that an electronic accessory has been designed to connect specifically to iPod, or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. *Apple is not responsible for the operation of this device or its compliance with safety and regulatory. *AirPlay, the AirPlay logo, iPhone, iPod, iPod classic, iPod nano, iPod shuffle, iPod touch and iTunes are trademarks of Apple Inc., registered in the U.S. and other countries. Denon Electronics (USA), LLC. D&M Canada 100 Corporate Drive, Mahwah, New Jersey 07430 USA TEL: 201-762-6500 usa.denon.com ca.denon.com D&M Holdings Inc. 18100111 A D&M Building, 2-1 Nisshin-cho, Kawasaki-ku, Kawasaki-shi, Kanagawa, 210-8569, Japan www.denon.com