Denon AVR 3806 Serial Protocol - Page 6

COMMAND PARAMETER function example CV SB UP ---SURROUND BACKch (SBch 1SP) CVSB UP SB DOWN CVSB DOWN SB ** **:00 to 99 by ASCII , 50=0dB CVSB 50 MU ON OUTPUT MUTE ON/OFF change MUON OFF MUOFF SI PHONO Select INPUT source SIPHONO CD SICD TUNER SITUNER DVD SIDVD VDP SIVDP TV SITV DBS SIDBS VCR-1 SIVCR-1 VCR-2 SIVCR-2 VCR-3 ---Invalid at AVR-3806 SIVCR-3 V.AUX SIV.AUX CDR/TAPE SICDR/TAPE ZM ON MAIN-ZONE ON/OFF change at AVR-3806 ZMON OFF ZMOFF Z2 PHONO MULTI ZONE-2 mode set , and select source at AVR-3806 Z2PHONO | ---The name of PARAMETER is | CDR/TAPE the same as that of the time of SI COMMAND. Z2CDR/TAPE SOURCE MULTI ZONE-2 mode cancel at AVR-3806 Z2SOURCE UP MULTI ZONE-2 VOLUME UP/DOWN , direct change to **dB Z2UP DOWN at AVR-3806 Z2DOWN ** **:10 to 99 by ASCII , 80=0dB, 99=---(MIN) Z280 ON MULTI ZONE-2 ON/OFF change at AVR-3806 Z2ON OFF Z2OFF Z2MU ON ZONE2 OUTPUT MUTE ON/OFF change Z2MUON OFF Z2MUOFF CV , Z2 COMMAND : "*" parameter uses two ASCII characters. (see page4 J) section) - 6 -