Denon AVR-590 Owners Manual - English - Page 29
Channel Level, Crossover Frequency - subwoofer set up
UPC - 883795000888
View all Denon AVR-590 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Getting Started Connections Settings Playback Remote Control Information Troubleshooting Specifications Setting items Setting contents Channel Level Test Tone Start : Output test tones. Set the volume of the test FL (Front L)/ C (Center)/ FR (Front R)/ SR (Surround R)/ tone to be the same when it SBRz (Surround Back R)/ SBLz (Surround Back L)/ SL (Surround L)/ is output from each speaker. FHL (Front Height L)/ FHR (Front Height R)/ SW (Subwoofer) : Select the speaker. zWhen the "S.Back" setting (vpage 25) is set to "1ch", "SB" is displayed. • -12.0dB ~ +12.0dB (0.0dB) : Adjust the volume. Setting items Crossover Frequency • W hen "Channel Level" is adjusted, the adjusted values are set for all the surround modes. To adjust the channel level separately for the different surround modes, use the operation see "Adjust the volume of the different speakers" (vpage 45). • S peakers set to "None" in the "Speaker Config." (vpage 25) settings are not displayed. • W hen o is pressed while the subwoofer volume is set to "-12dB", the "Channel Level" setting switches to "OFF". • If output of the test tones begins while the muting mode is set, the muting mode is canceled. Default : Reset all channel level settings to factory default. Yes : Reset to the defaults. No : Do not reset to the defaults. Crossover Frequency Crossover : Outputs at below set frequency, each speaker's bass signal Outputs at below set output from the subwoofer. frequency, each speaker's • 40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz / bass signal output from the 250Hz subwoofer. Set this according • Advanced : Set the low frequency signals to be output from the signals to the low frequency of the respective speakers to the subwoofer. reproduction capabilities of • Front / Center / Surround / S.Back / Front Height : Select the speaker. the speakers you are using. · 40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz / This can be set when 250Hz : Set the crossover frequency. "Speaker Config." - "Subwoofer" (vpage 25) is set to "Yes" or "No". ENGLISH Making detailed settings (Manual Setup) Setting contents • A lways set the crossover frequency to "80 Hz". When using small speakers, however, we recommend setting the crossover frequency to a higher frequency. • F or speakers set to "Small", sound below the crossover frequency is cut from the sound output. The cut bass sound is output from the subwoofer or front speakers. • The speakers that can be set when "Advanced" is selected differ according to the "Bass Setting" setting (vpage 25). · When "LFE" is selected, speakers set to "Small" at "Speaker Config." (vpage 25) can be set. · When "LFE+Main" is selected, speakers can be set regardless of the speaker size setting. Remote control operation buttons Displaying the menu : Cancel the menu : Moves the cursor (Up/Down/Left/Right) : Decision the setting : Return to previous menu 26