Denon AVR-884 Owners Manual - Page 41
Multi Zone
View all Denon AVR-884 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
ENGLISH 13 MULTI ZONE Multi-zone playback with multi-source MULTI ZONE MUSIC ENTERTAINMENT SYSTEM • When the outputs of the "ZONE2" OUT terminals are wired and connected to integrated amplifiers installed in other rooms, different sources can be played in rooms other than the main zone in which this unit and the playback devices are installed. (Refer to ZONE2 on the diagram below.) • ZONE 2 SPEAKER OUT can be used when "ZONE2" is selected at System Setup Menu "Power Amp Assignment". In this case, Surround Back Speaker Out cannot be used for MAIN ZONE. • When a sold separately room-to-room remote control unit (DENON RC-616, 617 or 618) is wired and connected between the main zone and zone2, the remote-controllable devices in the main zone can be controlled from zone2 using the remote control unit. NOTES: • For the AUDIO outputs, use high quality pin-plug cords and wire in such a way that there is no humming or noise. • For instructions on installation and operation of separately sold devices, refer to the devices' operating instructions. • When the main unit is set to the recording output mode, zone2 remote control key cannot be operated. POWER AMP ASSIGNMENT setting.....Set this to switch the surround back channel's power amplifier for use for the ZONE2. (See page 28) SURROUND BACK button Operate the surround back button to switch surround back channel ON/OFF. (main unit and remote control unit) ZONE2 ON/OFF button Operate the ZONE2 button to switch ZONE2 line out and speaker out ON/OFF.(remote control unit) 2 MULTI ZONE MUSIC ENTERTAINMENT SYSTEM (When using LINE OUT) "POWER AMP ASSIGNMENT" setting is S. BACK mode. • 6.1-channel playback using the surround back speaker is possible in the MAIN ZONE. • To use the surround back speaker, turn on the SURROUND BACK button. • To use the ZONE2 line output, turn on the ZONE2 button. • The ZONE2 OUT terminal's output level cannot be adjusted with the remote control unit. ZONE2 MAIN ZONE INTEGRATED AMPLIFIER REMOTE CONTROL UNIT with ZONE2 mode : AUDIO signal cable : SPEAKER cable RC-617 AVR-1804/884 FL C FR SW SL RC-616 REMOTE CONTROL UNIT SR SB (Main unit's front panel) (Remote control unit) (Light) (Light) 2 MULTI ZONE MUSIC ENTERTAINMENT SYSTEM (When using SPEAKER OUT) "POWER AMP ASSIGNMENT" setting is ZONE2 mode. • The SPEAKER OUT and LINE OUT terminals can be used simultaneously in ZONE2. • To use the ZONE2 line output and speaker output, turn on the ZONE2 button. • The output of the ZONE2 SPEAKER OUT terminals can be adjusted with the remote control unit's ZONE2 VOLUME + and - keys. • The SURROUND BACK button on the front panel cannot be used. ZONE2 MAIN ZONE REMOTE CONTROL UNIT with ZONE2 mode : SPEAKER cable RC-617 AVR-1804/884 FL C FR SW SL RC-616 REMOTE CONTROL UNIT SR (Light) (Main unit's front panel) (Remote control unit) 41