Denon AVR-985S Owners Manual - Page 37
Setting the Digital In Assignment - avr 985 reset
UPC - 081757506106
View all Denon AVR-985S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
3-1 Setting the Digital In Assignment • This setting assigns the digital input jacks of the AVR-2805/985 for the different input sources. 1 At the Input Setup Menu select "Digital In Assign". (Remote control unit) *Input Setup Digital In 2 Display the Digital Inputs screen. (Remote control unit) *Digital In CD : COAX1 3 Select the digital input jack to be assigned to the input source. q Select the input source (Remote control unit) w Select the digital input jack Select "OFF" for input sources for which no digital input jacks are used. If "Yes" is selected for "Default", the settings are automatically reset to the default values. (Remote control unit) 4 Enter the setting. The Input Setup Menu reappears. (Remote control unit) NOTES: • The OPTICAL 3, 4 jacks on the AVR-2805/985's rear panel are equipped with an optical digital output jack for recording digital signals on a CD recorder, MD recorder or other digital recorder. Use this for digital recording between a digital audio source (stereo - 2 channel) and a digital audio recorder. • Do not connect the output of the component connected to the OPTICAL 3, 4 OUT jack on the AVR-2805/985's rear panel to any jack other than the OPTICAL 3, 4 IN jack. • "PHONO" and "TUNER" cannot be selected on the Digital In Assignment. 37