Denon DCM-5000 Serial Protocol - Page 33
List Of Error Codes - manual
View all Denon DCM-5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
3. List Of Error Codes x: Drive mechanism number y: DIR number z: 0 to 9 Error code No 1st 2nd Error description 1 0x20 000 No disk in the CD drive 2 0x21 000 Unadjustable tracking offset 3 0x22 000 Unadjustable focus offset 4 0x23 000 Unadjustable rough focus gain 5 0x24 000 Disabled focusing (or failure of spindle retraction) 6 0x25 000 No tracking 7 0x26 000 Unadjustable rough tracking gain 8 0x27 000 Focusing failed in reproduction 9 0x28 000 Focusing failed in searching 10 0x29 000 Focusing failed in automatic adjustment 11 0x2A 000 Focusing failed in TOC reading 12 0x2C 000 Focusing failed in pausing 13 0x2D 000 Focusing failed in manual searching 14 0x2E 000 Cannot read a sub-code for 0.5 second. 15 0x2F 000 Cannot read a sub-code for 1 second. 16 0x30 000 Cannot read a sub-code in TOC reading. 17 0x32 000 Cannot read a sub-code in pausing. 18 0x33 000 Cannot read a sub-code in manual searching. 19 0x34 000 Cannot read within a preset time period in TOC reading. 20 0x35 000 Cannot turn on the INNER TRACK switch. 21 0040 000 Cannot detect the door switch in opening. 22 0041 000 Cannot detect the door switch in operation. 23 0y80 000 DIR unlock 24 0y81 000 FS (44.1 KHz) error 25 0x39 000 Cannot read CD TEXT within a preset time period. (Timeout) 26 4825 zzz Address sensor lower bit error 27 4826 zzz Address sensor higher bit error 28 4827 zzz Address matching sensor lower bit error 29 4828 zzz Address matching sensor higher bit error 30 4829 zzz Selector sensor (LIMS0) error 31 4830 zzz Selector sensor (LIMS1) error 32 4831 zzz Lifter/loader sensor (LIMS0) error 33 4832 zzz Lifter/loader sensor (LIMS1) error 34 4833 zzz Loader-down reconfirmation sensor (LIMS2) error 35 4834 zzz Disk chuck (LIMS0) error 36 4835 zzz Disk chuck (LIMS1) error 37 4836 zzz Front limit sensor error 38 4837 zzz Rear limit sensor error 39 4838 zzz Rear clamper sensor error 40 4839 zzz Front clamper sensor error 41 4840 zzz Drive position sensor (1) error 42 4841 zzz Drive position sensor (2) error 43 4842 zzz Disk rack error 44 3000 zzz Cannot take out a disk although "Disk Present" is indicated by the disk sensor. 45 1000 000 Communication error after a slave unit connection is recognized (1) Error codes 0*2*000 to 0*34000 and 0*39000 The disc may be inserted in reverse in the CD rack (with the label side reversed) or the disk may have contaminants or scratches on its surface. (2) Error codes 4827*** and 4828*** The CD rack may be inserted incompletely.