Denon DHT-484XP Owners Manual - Page 16
Setting Up The System
![]() |
View all Denon DHT-484XP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
ENGLISH 10 SETTING UP THE SYSTEM • Once all connections with other AV components have been completed as described in "CONNECTIONS" (see pages 9 to 14), make the various settings described below on the display. These settings are required to set up the listening room's AV system centered around the this unit. 1 Set the slide switch to "AUDIO". 2 Use the following buttons to set up the system: SYSTEM SETUP button Press this to display the system setup on the display. CURSOR buttons (•, ª, 0, 1) Press this change what appears on the display. ENTER button Press this to switch the display. Also use this button to complete the setting. • System setup items and default values (set upon shipment from the factory) Speaker Configuration System setup Input the combination of speakers in your system and their corresponding sizes (SMALL for regular speakers, LARGE for full-size, full-range) to automatically set the composition of the signals output from the speakers and the frequency response. Subwoofer Mode This selects the subwoofer speaker for playing deep bass signals. Delay Time Digital In Assignment This parameter is for optimizing the timing with which the audio signals are produced from the speakers and subwoofer according to the listening position. This assigns the digital input jacks for the different input sources. Digital Inputs Input source Front Sp. Large Default settings Center Sp. Surround Sp. Small Small Subwoofer mode = Normal Front & Subwoofer 12 ft (3.6 m) COAXIAL OPTICAL DVD/VDP TV/DBS Center 12 ft (3.6 m) Surround L & R 10 ft (3.0 m) NOTE: • The system setup is not displayed when "HEADPHONE ONLY" is selected. Sub Woofer Yes - - 16
![](/manual_guide/products/denon-dht484xp-owners-manual-9c80313/16.png)