Denon DN-S3700 Owners Manual - Page 10
Connections, Playback, Specifications, Basic Operations, Memo Function, Utility - midi
View all Denon DN-S3700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Getting Started Connections Playback Basic Operations Memo Function Utility Specifications Q4 CLR1, CLR2, CLR3 buttons These clear the hot start points or the auto loop playback start points. Q5 EXIT button When the EXIT button is pressed during auto loop playback, auto looping is canceled and normal playback resumes. Q6 Vibrant Tube Display The display provides various information relating to playback, title, position, time and others. Q7 MIDI button This sets the MIDI mode and starts the USB MIDI control mode. Q8 USB button This sets the USB mode. Use this button to play files on USB devices. Q9 CD button This sets the CD mode. Use this button to play CDs and MP3 files on CD-ROMs. W0 FLIP, -CLR button ⋅ FLIP: When the A point is set, the FLIP button provides two modes of operation, Hot Start mode and Stutter mode. The display will indicate "H/S" or "STR". ⋅ CLR: You are able to clear the, A or B points individually as well as both points simultaneously. To clear A or B, push the FLIP button first, followed by the A or B buttons. To clear both points, press and hold the FLIP button for 2 seconds. W1 TIME button, -UTILITY button ⋅ TIME: The display switches between "ELAPSED" (elapsed time), "REMAIN" (remaining time), "T.ELAPSED" (total elapsed time) and "T.REMAIN" (total remaining time) each time the button is pressed. NOTE It is not possible to switch the total elapsed time and total remaining time when searching for files in the USB mode. ⋅ UTILITY: The Utility mode is set when this button is longpressed while the player is in the Cue mode. W2 TITLE/ID3 button, -CONT./SINGLE button ⋅ TITLE: CD mode Each time the button is pressed when there is CD text data, the display switches between the "Artist", "Album", "Title" and the display shown before the display was switched. USB and CD-ROM mode When the button is pressed while in the USB mode, the display switches between the "Artist", "Album", "Title", "Genre", "Year" and the display shown before the display was switched. ⋅ CONT. SINGLE: The display switches between the single play mode (PLAY LOCK), single play mode (LOCK OFF) and continuous play each time the button is pressed and held in for over 1 second. ⋅ SINGLE PLAY LOCK (Single play & play lock) "Single play & play lock" can be selected in the "PRESET" settings. When "Single play & play lock" is selected, the single play mode is set. In this mode, files cannot be selected during playback, thus preventing files from being selected or playback stopped accidentally. W3 DISPLAY button, -RELAY button ⋅ DISPLAY: Use this button switch the waveform display. The display switches as follows each time the button is pressed: 1. Character display + Waveform display 2. Waveform display + Display of various points b For the waveform display, when in the USB mode, the waveform is only displayed when waveform data is stored in the ID3 tag data. ⋅ RELAY: You can turn the RELAY mode ON/OFF when this button is pressed held for over 1 second. W4 A button Using this button you can create starting point for Hot Start, Seamless Loop and Stutter. W5 B button Use this to set the B point for to create a Seamless Loop after the A point has been set. W6 EXIT/RELOOP button Use this to exit or return back again to Seamless loop playback. You can add variety to looping with this function. W7 NEXT TRACK button When the button is pressed during playback, the next track mode is selected. W8 A/B TRIM buttons When pressed during seamless looping, the mode for adjusting seamless loop point A or B is set. W9 PARAMETERS knob ⋅ PARAMETERS: When the PARAMETERS knob is turned, the Platter effect, memo, preset or other parameters and data can be selected. ⋅ FILE SEARCH: When the PARAMETERS knob is turned while pressing it, the letter search mode is set. ⋅ TRACK SEARCH, Playlist, FILE SEARCH: When the PARAMETERS knob is pressed, tracks (files) can be selected one track at a time. When the PARAMETERS knob is turned while pressing it, tracks (files) can be selected in units of 10. When using CD and CD-ROM discs. E0 BACK button Press this button to return to the previous screen. A long-press shall return to the top menu. E1 PLAYLIST button The mode switches between file search and playlist search each time this button is pressed in the USB play mode. E2 PITCH SLIDER Use this slider to adjust playing speed. The playing speed decreases when sliding upwards and increases downwards. E3 PITCH BEND +/- buttons • Pushing these buttons will change main playing speed temporarily. • While pushing PITCH BEND + button the playing speed increases and speed decreases while pushing PITCH BEND - button. • When release button, playing speed returns to the previous speed. E4 PITCH button The pitch range switches as follows each time the button is pressed: Pitch off ±6 % ±10 % ±16 % ±100 % Pitch off. The PITCH LED lights in all cases, except when the pitch mode is turned off. E5 KEY ADJUST button Use this to turn the key adjust mode on and off. E6 PLATTER MODE button When this button is pressed, the Platter disc operation mode can be selected. ⋅ CLASSIC VINYL: (Spinning) When the Platter mode is set to the classic Vinyl mode, operation like a turntable is possible by touching the spinning Vinyl disc. ⋅ BEND/SEARCH: When the PLATTER Source is set to BEND during playback, it alternates as the pitch bend function. The display will indicate "Bend". When PLATTER Source is set to Search, during Pause or CUE mode, it alternates as the Manual Search function. Manual search allows you to move the CUE point around by one frame at a time (1/75 second) with an audible frame-repeat sound. The display will indicate "Search". E7 Vinyl disc The Vinyl playback, manual search and pitch bend can be selected. In the file search mode, the file can be selected. E8 REVERSE button Push this button to set the REVERSE. E9 DUMP button Push this button to set the DUMP. R0 BRAKE button Push this button to set the BRAKE and adjust the parameter. R1 DISC EJECT button When the button is pressed, the CD is ejected. Ejection is locked while a CD is playing. R2 Strobo Indicator It can check the relative change in tempo when the red strobe light reflects on the three rows of strobe dots on the peripheral edge of the platter when rotating. Upper dots: When the dots appear to be stationary, the pitch setting is changed about +3.5 %. Center dots: When the dots appear to be stationary, the pitch setting is ±0 % (33 rpm or 45 rpm). Lower dots: When the dots appear to be stationary, the pitch setting is changed about -3.5 %.