Denon DNS1200 Owners Manual - Page 9

Getting Started Connections Playback Basic Operations Memo Function Utility Specifications Q2 TIME button, -CONT./SINGLE button ⋅ TIME: The display switches between "ELAPSED" (elapsed time), "REMAIN" (remaining time), "T.ELAPSED" (total elapsed time) and "T.REMAIN" (total remaining time) each time the button is pressed. NOTE It is not possible to switch the total elapsed time and total remaining time when searching for files in the USB mode. ⋅ CONT./SINGLE: The display switches between the single play mode (PLAY LOCK), single play mode (LOCK OFF) and continuous play each time the button is pressed and held in for over 1 second. ⋅ CONT. (Continuous play mode) Playback continues through the end of the last file. ⋅ SINGLE (Single play mode) The currently playing file is played to the end. ⋅ SINGLE PLAY LOCK (Single play & play lock) "Single play & play lock" can be selected in the "PRESET" settings. When "Single play & play lock" is selected, the single play mode is set. In this mode, files cannot be selected during playback, thus preventing files from being selected or playback stopped accidentally. Q3 Display Q4 •TITLE/ID3 button, -UTILITY button ⋅ TITLE: CD mode Each time the button is pressed when there is CD text data, the display switches between the "Artist", "Album", "Title" and the display shown before the display was switched. USB mode When the button is pressed while in the USB mode, the display switches between the "Artist", "Album", "Title", "Genre", "Year" and the display shown before the display was switched. ⋅ UTILITY: The Utility mode is set when this button is longpressed while the player is in the Cue mode. Q5 SOURCE button When this button is pressed, the source selection screen is displayed. Q6 MEMO, -PRESET button ⋅ MEMO: Various settings such as Cue Point, Hot Starts, Loops, BPM, Pitch and Key Adjust can be saved for later recall. ⋅ PRESET: When this button is pushed for more than 1 sec, the PRESET mode menu is displayed. The machine status must be in CUE, PAUSE or No Disc mode before entering the preset mode. Q7 •QUICK JUMP button, -FAST SEARCH button (6) (7) ⋅ QUICK JUMP: The play position jumps backward when the (6) button is pressed and immediately released. The play position jumps forward when the (7) button is pressed and immediately released. ⋅ FAST SEARCH: When one of these buttons is pressed and held in, the disc is fast-searched in the reverse (6) or forward (7) direction. Q8 PARAMETERS knob ⋅ PARAMETERS: When the PARAMETERS knob is turned, the platter effect, memo, preset or other parameters and data can be selected. ⋅ FILE SEARCH: When the PARAMETERS knob is turned while pressing it, the letter search mode is set. ⋅ TRACK SEARCH, Playlist, FILE SEARCH: When the PARAMETERS knob is pressed, tracks (files) can be selected one track at a time. When the PARAMETERS knob is turned while pressing it, tracks (files) can be selected in units of 10. Q9 BACK button Press this button to return to the previous screen. A long-press shall return to the top menu. W0 PITCH SLIDER Use this slider to adjust playing speed. The playing speed decreases when slid upwards and increases downwards. W1 PITCH/KEY, -RANGE: ⋅ PITCH/KEY: The mode switches between pitch on, key adjust on and pitch off each time the button is pressed and released immediately. The indicator lights when in the pitch on and key adjust on modes. ⋅ RANGE: Push this button for more than 1 sec to select the pitch range. The pitch range can be selected with the PARAMETERS knob from ±4, 10, 16, 24, 50 or 100 %. W2 PITCH BEND +/- buttons • Pushing these buttons will change main playing speed temporarily. • While pushing PITCH BEND + button the playing speed increases and speed decreases while pushing PITCH BEND - button. • When release button, playing speed returns to the previous speed. W3 JOG MODE button When this button is pressed, the Scratch disc operation mode can be selected. ⋅ SCRATCH: The button lights orange during scratch playback. ⋅ BEND/SEARCH: When the PLATTER Source is set to BEND during playback, it alternates as the pitch bend function.The display will indicate "Bend". When PLATTER Source is set to Search, during Pause or CUE mode,it alternates as the Manual Search function. Manual search allows you to move the CUE point around by one frame at a time (1/75 second) with an audible frame-repeat sound. The display will indicate "Search". W4 Scratch disc The scratch playback, manual search, pitch bend and effector parameters can be selected. In the file search mode, the file can be selected. W5 REVERSE button Push this button to set the REVERSE. W6 DUMP button Push this button to set the DUMP. W7 BRAKE button Push this button to set the BRAKE and adjust the parameter. W8 PLAYLIST, DISC EJECT button ⋅ PLAYLIST: The mode switches between file search and playlist search each time this button is pressed in the USB play mode. When pressed while in a mode other than USB play, the mode switches between the search mode and the playlist search mode each time the button is pressed. ⋅ DISC EJECT: When the button is pressed, the CD is ejected. Ejection is locked while a CD is playing. During USB playback, the disc is ejected when the DISC EJECT button is pressed for over 1 second.