Denon DNT645 Specifications - Page 2
DN-T645 / DN-T625 - dn t645 recording
View all Denon DNT645 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
DN-T645 / DN-T625 General - Standard 19-Inch, 3RU Aluminum Front Panel - IR Remote Sensor - Relay Playback - Power-On Play - Independent FL Tube Displays for Both CD and Cassette Decks - Various Preset Functions (25 Items) Options - RC-U620: Hand-Held IR Remote - RC-41: Wristwatch IR Remote - RC-620: Wired Remote Expanded Connection In/Out (RCA) Cascade Function (Figure 1) The ports (CASCADE IN/OUT) of multiple DN-T645/T625 units can be linked by cables to enable continuous playback or recording among the units.Synchronized Recording (Figure 2) The ports (EXT. SYNC IN/OUT) of the DN-T645/T625 and multiple DN-780R units can be linked by cables to enable simultaneous recording by all DN-780R units. (Up to 20 units can be connected for continuous recording of the source.) Figure 1 Figure 2 D&M Professional 1100 Maplewood Drive Itasca, Illinois 60143 Tel: 630.741.0330 Fax: 630.741.0652 www.d-mpro.com DN-T645 DN-T625 Specifications CD Section Audio Channel Digital Filter Frequency Response Total Harmonic Distortion S/N Ratio Channel Separation Sampling Frequency Analog Outputs (1 kHz, 0 dB Playback) Balanced Unbalanced Digital Output Transfer and Connector Signal Format 2 stereo channel 8-times oversampling digital filter 20 Hz - 20 kHz 0.009% 98 dB 70 dB 44.1 kHz (at normal pitch) +18dBu at 0 dB disc, 600 ohms, 3-Pin XLR (1: GND, 2: HOT, 3: COLD) L: +18 dBu, R: -10 dBu (MONO output) 2.0 Vrms at 0 dB disc, 10 kohms Coaxial (RCA) IEC-958 type II (SPDIF) Cassette Deck Section Heads Record and Playback Erase Motor Wow and Flutter Fast Forward Time Speed Adjustment Single to Noise Ratio Line Input Sensitive Balanced Unbalanced MIC Input Sensitive Line Output Balanced Unbalanced Headphone Output Power Supply Power Consumption Dimensions Weight Hard permalloy x 1 Double-gap ferrite x 1 DC servo motor x 2 0.06% wrms Approximately 110 seconds (C60 tape) ±12% or better with center click 70 dB (Dolby C on, 3% THD by CCIR/ARM) 90 mV, 120 kohms, 3-pin XLR (1: GND, 2: HOT, 3: COLD) 50 mV, 47 kohms 0.775 mV (mic level max.), 1/4" TRS type +4 dBu (0 dB), 600 ohms, 3-pin XLR (1: GND, 2: HOT, 3: COLD) L: +4 dBu, R: -10 dBu (MONO output) 775 mV (0 dB), 47 kohms 15 mW, 33 ohms AC120V, 60 Hz 25W 482 (W) x 134 (H) x 275 (D) mm 19.0 (W) x 5.3 (H) x 10.8 (D) inch (3 rack units, removable rack ears) 6.7 kg, 14.8 lbs Specifications are subject to change without notice. Dolby noise reduction and HX Pro headroom extension manufactured under license from Dolby Laboratories Licensing Corporation. HX Pro originated by Bang & Olufsen. Dolby, the double-D symbol, and HX Pro are trademarks of Dolby Laboratories Licensing Corporation. [AMX logo] is a trademark of AMX Corporation. [Crestron logo] is a trademark of Crestron Electronics Inc.