Denon DNX900 Operating Instructions - Page 10

ENGLISH 5 FADER START If the separately sold DN-S3500, DN-D4500 and etc. players are connected to LINE2, 4, 6 or 8, they can be started using the source input fader (Ch. Fader) or Crossfader, as long as the 3.5 mm stereo mini cords have been connected. Channel Fader Start Turn the INPUT ASSIGN switch !2 to select the desired source from LINE2, 4, 6 or 8. 1 FADER FADER FADER FADER LINE 2 LINE 4 LINE 6 LINE 8 LINE 2 LINE 4 LINE 6 LINE 8 DN-X500/X900 Turn on the CH FADER START switch #2. (CROSS FADER ASSIGN position is 2 POST) FADER FADER FADER FADER MAIN ALPHA MAIN ALPHA MAIN ALPHA MAIN ALPHA DN-S3500 DN-D4500 CD1 DN-S3500 DN-D4500 CD2 RCA cord 3.5 mm stereo mini cord Move the source input fader (Ch. Fader) !3 of CH-1, CH-2, CH-3 or CH-4 control all the way to the 3 bottom. 4 Set the standby mode on CD player. When you want to start the player, move up the source input fader (Ch. Fader) !3 and the CD player 5 will begin playing. Crossfader Start Turn the INPUT ASSIGN switch !2 to select the desired source from LINE2, 4, 6 or 8. 1 Using the CROSSFADER ASSIGN switch @,7 assign the channel or 2 Sampler source into A or B of Crossfader. Turn on the CROSSFADER START A, B switches #1. 3 Slide the Crossfader @8 all the way in direction opposite the source you want to start. (In the following example, startup is done with the CD player connected set to Assign A.) 4 5 Set the standby mode on CD player. 6 Use the CROSSFADER CONTOUR control @9 to control the cross fader startup curve. When the Crossfader @8 is slid in the opposite direction, CD player play will begin. 7 5 ENGLISH