Denon DRA-37 Owners Manual - English - Page 9
Speaker impedance, Connections - problems
UPC - 081757507363
View all Denon DRA-37 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Connections Speaker connections Connect the speaker terminals with the speakers making sure that like polarities are matched (< with with >). NOTE: When making connections, take care that none of the individual conductors of the speaker cable come in contact with adjacent terminals, with other speaker cable conductors, or with the rear panel and screws. NEVER touch the speaker terminals when the power is on. Doing so could result in electric shocks. Connecting the speaker cables 1. Loosen by turning counterclockwise. 2. Insert the cable. Either tightly twist or terminate the core wires. 3. Tighten by turning clockwise. ¢ Speaker impedance Speaker A, B A+B Impedance 4 ~ 16 Ω/ohms 8 ~ 16 Ω/ohms Note on speaker impedance When using speakers with an impedance below the designated value (for example 4 Ω/ohms), playing for long periods of time with the volume high could cause the temperature to rise, activating the protection circuit. When the protection circuit is activated, the output to the speakers is cut off and the power indicator blinks. If this happens, unplug the power cord, wait for the set to cool off and improve ventilation around the unit. Also check the wiring of the input cables and the speaker cables. After doing this, plug the power cord back in and turn the unit's power back on. If the protection circuit is activated again even though there are no problems with the wiring or the ventilation around the unit, switch off the power and contact a DENON service center. Connecting banana plugs Turn clockwise to tighten, then insert the banana plug. ENGLISH Connections ¢ Connections • When making connections, also refer to the operating instructions of the other components. Subwoofer Speakers (B) Speakers (A) Connection terminal for subwoofer with built-in amplifier. (L) (R) IN >< B C (L) (R) >< C Connecting a DVD player and monitor D D A L R Monitor VIDEO IN DVD player VIDEO OUT AUDIO OUT L L R R • Connect a non-DVD video disc player (such as a laser disc, VCD/SVCD, or future high definition disc player) to the DVD/VDP terminals in the same way. 6 ENGLISH