Denon DRA CX3 Owners Manual - English - Page 13

Getting Started Connections Operation Troubleshooting Specifications ENGLISH Recording 1 Press FUNCTION to select the input function. > CD PHONO LINE1 (iPod) TUNER LINE3 LINE2 b The function can be switched directly to "TUNER" by pressing , to "CD" by pressing . z The "iPod" indicator is displayed when a Control Dock for iPod is connected. ("NO iPod" is displayed if no iPod is connected to the Control Dock for iPod.) 2 Set the recorder to the recording mode. b For instructions on operating, see the operating instructions of the connected component. 3 Start playback on the player. b For instructions on operating, see the operating instructions of the connected component. • The LINE3 input signal is not output to the recording output terminal (REC). • Adjusting the volume or tone does not affect the sound being recorded. Tuning in radio broadcasts 1 Press [TUNER] , or to select "TUNER". The reception frequency is displayed. 2 Press [BAND] to select the reception band. FM AUTO FM MONO AM 3 Press [TUNING] to select the reception frequency. The "TUNED" indicator lights when a station is tuned in. n FM station reception conditions • When the reception band mode is set to "FM AUTO", the "ST" indicator lights when a stereo broadcast is tuned in. • If the signal is weak and the stereo broadcast reception is not stable, set the reception mode to "FM MONO". The "MONO" indicator lights. n Auto tuning Press and hold in or [TUNING] to search for and tune in the next stereo broadcast automatically. Stations cannot be tuned in if the signal is too weak. n Canceling auto tuning Press or [TUNING]. n Manual tuning The frequency changes one step at a time each time [TUNING] is pressed. Noise may be produced in the sound when receiving AM broadcasts if there is e.g. a TV nearby. If so, move the DRA-CX3 and TV as far apart as possible. Presetting Giving a name to the currently tuned in broadcast station and presetting it • A total of 40 FM and AM broadcast stations combined can be preset. • Preset stations can be given names of up to 8 characters. 1 Tune in the broadcast station. The reception frequency is displayed. 2 Press [EDIT]. The name input mode is set. 3 Press [CHANNEL] to select the desired character. b Up to 8 characters can be input for each preset. The characters that can be input are as shown below. A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9 space) b Press [TUNING] to move the cursor. b Press [CLEAR] to delete characters. 4 Press [ENTER]. The name input mode is set. 5 Press [CHANNEL] to select the preset number, then press [ENTER]. The reception frequency and reception mode are preset. n To change the name of a preset station: q Call out the preset name to be changed, then press [EDIT]. w Perform steps 3, 4 under "Giving a name to the currently tuned in broadcast station and presetting it". n To only preset the station: q Press [ENTER] while the station is tuned in. w Perform step 5 under "Giving a name to the currently tuned in broadcast station and presetting it". NOTE If a station is preset at a number where a station has already been preset, the old setting is deleted and replaced with the new setting. 10