Denon DVD-1910 Owners Manual - Page 24

DVD SETUP Audio Setting Choose the appropriate Audio settings for your equipment as it only affect during the playback of DVD discs of the DVD player. 1 Press the SETUP button in STOP mode. 2 Press the Cursor buttons ( s or B ) to select CUSTOM, then press the ENTER button. • CUSTOM mode will appear. 3 Press the Cursor buttons ( s or B ) to select AUDIO, then the ENTER button to confirm. 4 Press the Cursor buttons ( K or L ) button to select the AUDIO DRC ON LPCM SELECT OFF DOLBY DIGITAL ON DTS ON below items, then press the ENTER button. DRC (Dynamic Range Control) (Default : ON) • To compress the range of sound volume. • DRC function is available only on the discs that are recorded in the Dolby Digital format. AUDIO DRC ON LPCM SELECT OFF DOLBY DIGITAL ON DTS ON LPCM SELECT (Default : OFF) • Set to ON when outputting in 48kHz. • This function is available only on digital outputting of a disc recorded in 96 kHz. AUDIO DRC ON LPCM SELECT OFF DOLBY DIGITAL ON DTS ON When playing disc with copyright protection • The sound will be down sampled at 48 kHz, even if you set to OFF. DOLBY DIGITAL (Default : ON) QUICK Set to ON when the player is connected to Dolby Digital decoder. ON: Output by Dolby Digital. OFF: Convert the Dolby Digital to PCM. AUDIO DRC ON LPCM SELECT OFF DOLBY DIGITAL ON DTS ON DTS (Default : ON) QUICK ON: OFF: Output by DTS sound. Set to ON when the unit is connected to DTS decoder. No DTS sound will be output. AUDIO DRC ON LPCM SELECT OFF DOLBY DIGITAL ON DTS ON • DTS sound is output only from the digital audio outputs. 5 Press the SETUP button to exit. Ratings Control Ratings Control limits playback of discs with unsuitable audience ratings. A 4-digit password established by the user will unlock the parental lock. This feature allows you to prevent discs with objectionable scenes from being played by your children. RATING LEVEL Rating Level allows you to set the rating level of your DVD discs. Playback will stop if the disc's ratings exceed the level you set. 1 Press the SETUP button in STOP mode. 2 Press the Cursor buttons ( s or B ) to select CUS- TOM, then press the ENTER button. 3 Press the Cursor buttons ( s or B ) to select RAT- INGS, then press the ENTER button. 4 Press the Numeric buttons to enter your 4-digit password. • When doing this for the first time, enter any 4-digit number by pressing the Numeric buttons (except for 4737), then press the ENTER button. That number will be used as the password from the second time onward. Record your password in case you forget it. RATINGS PASSWORD Please enter a 4-digit password. • If you forget the password, press 4, 7, 3, 7. The original password will be cleared and parental levels will be set to "ALL". Enter a new 4-digit password, then press the ENTER button. 5 Press the Cursor buttons ( K or L ) to select RATING LEVEL, then press the ENTER button. RATINGS RATING LEVEL ALL CHANGE 6 Press the Cursor buttons ( K or L ) to select the desired level, then press the ENTER button. 7 Press the SETUP button to exit. RATINGS RATING LEVEL ALL 8 7 [NC-17] 6 [R] 5 4 [PG13] 3 [PG] L NOTE: • This function may not work on some DVDs. Be sure if the RATINGS operates in the way you have set. To Change the Password: 1) Follow the steps 1 to 4 above. 2) Press the Cursor buttons ( K or L ) to select "CHANGE", then press the ENTER button. 3) Enter a new 4-digit password, then press the ENTER but- ton. 4) Press the SETUP button to exit. IF YOU FORGET THE PASSWORD 1 Press 4, 7, 3, 7 at step 4 . • Password will be cleared and rating level will be set to ALL. 2 Repeat steps 4 - 7 to re-establish the parental lock. CONTROL LEVELS • ALL Parental lock is cancelled. • Level 8 DVD software of any grade (adult/general/children) can be played back. • Levels 7 to 2 Only DVD software intended for general use and children can be played back. • Level 1 Only DVD software intended for children can be played back, with those intended for adult and general use prohibited. Returning all selections of SETUP (except for RATINGS) to their default settings This allows you to return all selections of SETUP (except for RATINGS) to their default settings. 1 Press the SETUP button in STOP mode. 2 Press the Cursor buttons ( s or B ) to select INITIALIZE, then press the ENTER button. 3 Press the Cursor buttons ( K or L ) to select YES, then press the ENTER button. 4 Press the SETUP button to exit. NOTE: • When you cancel to INITIALIZE at step 3 , select NO. - 24 - EN