Denon DVD-2910 Owners Manual - Page 46

ENGLISH SHARPNESS (HI) (-6 to +6) (Factory default: 0) • This adjusts the sharpness of the image for the high frequencies. (Only effective for progressive images.) HUE (-6 to +6) (Factory default: 0) • This adjusts the balance between green and red. 3 (Not effective for progressive scan output nor component output.) CCS (0 to +3) (Factory default: 0) • This performs removal of the color signal component for images in which the color signal component is mixed with the brightness signal. (Only effective with progressive images.) When Image Quality Adjustment 2 Is Selected and Adjusted: WHITE LEVEL (-5 to +5) (Factory default: 0) • This adjusts the white level. CHROMA LEVEL (-6 to +6) (Factory default: 0) 4 • This adjusts the density of the color. CHROMA DELAY (-2 to +2) (Factory default: 0) • This adjusts the shift of the brightness signal and the color signal of the image. (Only effective for progressive images.) DNR (Digital Noise Reduction) (0 to +6) (Factory default: 0) • This reduces video noise. Remote control unit MEMORY 1 1 2 0 0 0 0 When Gamma Correction is Selected and Adjusted: Two kinds of displays are prepared for adjustment of Gamma Correction. • When use the Numerical table of Gamma Correction. (Figure 1) :Pressing the cursor button (ª) • When use the Graph of Gamma Correction. (Figure 2) :Pressing the enter button Remote control unit Select the adjust point with cursor buttons (0, 1), set the adjustment brightness level with cursor buttons (•, ª), and press the ENTER button. (If the PICTURE ADJUST button is pressed before pressing the enter button, an adjustment level is not stored) • The brightness level can be adjusted in range of 16 to 235. • Pressing the cursor button (•) raises the level (and the image becomes brighter), and pressing the cursor button (ª) lowers the level (and the image becomes darker). • A press of the CLEAR button returns all of the setting points to the standard level. 5 ✽ The level of the selected point cannot exceed the level of the points above and below that point. (A dark portion cannot be set to exceed a portion that is brighter than it.) MEMORY 1 1 2 G0 G1 G2 G3 G4 G5 G6 G7 G8 G9 24 32 48 64 80 96 128 160 192 224 MEMORY 1 GO : 0 2 4 235 (Figure 1) ✽ Ending the Image Quality Adjustment 46 0 0 100 (Figure 2)