Denon DVD-5900 Owners Manual - Page 70

Troubleshooting Pg 70, Check again before assuming the player is malfunctioning - for sale

Page 70 highlights

ENGLISH 23 TROUBLESHOOTING Check again before assuming the player is malfunctioning 2 Are all the connections correct ? 2 Are you following the instructions in the manual ? 2 Are the amplifier and speakers operating properly ? If the DVD-5900 does not seem to be functioning properly, check the table below. If this does not solve the problem, the DVD-5900 may be damaged. Turn off the power, unplug the power cord from the power outlet, and contact your store of purchase or nearest Denon sales office. Symptom Check Page Power does not turn on. • Plug the power supply cord securely into the power outlet. 10~18, 20 Playback does not start when PLAY • Is there condensation on the disc or player ? (Let stand for 1 or 2 hours.) - button is pressed. • Discs other than DVDs,SuperAudio CDs, video CDs and music CDs cannot be played. 8 Playback stops immediately. • Disc is dirty. Wipe off the dirt. 9 Picture does not appear. • Check the connections. • Check that VIDEO OUT has not been set to "VIDEO OFF" or "ALL OFF" for PURE DIRECT MODE. • Set the TV's input to "video". • When the DVI connector output the signals, no progressive signals from the component video connector. If you wish to use the component video output, set to "DVI OFF" for DVI SETUP. 10~18 47, 48 - 47, 48 Sound is not produced or sound quality is poor. Menu playback of video CD's is not possible. Picture is disturbed during the search operation. Buttons do not operate. No subtitles are displayed. Audio (or subtitle) language does not switch. Angle does not switch. Playback does not start when the title is selected. The password for rating level has been forgotten. Reset all the setting to Factory Preset. The disc is not played with the audio or subtitle language set as the default setting. Picture is not displayed in 4:3 (or 16:9). Menu screen messages for the desired language do not display. • Check the connections. • Properly set the input of the TV, stereo, etc. • Check the "DIGITAL OUT" and "COMPRESSION" settings. • Digital signals cannot be output with Super audio CDs. Use analog connections. • Area/layer of Super audio CD being played (CD/stereo/multi-channel) does not match amplifier connections. • Menu playback is not possible with anything but video CDs with playback control. • Some disturbance is normal. • Some operations are disabled for some discs. • Subtitles are not displayed for DVDs not containing subtitles. • Subtitles are turned off. Turn the subtitles setting on. • The audio (or subtitle) language does not switch for discs which do not include multiple audio (or subtitle) languages. • For some discs the audio (or subtitle) language cannot be switched when the operation to switch it is performed, but can be switched on the menu screens. • The angle cannot be switched for DVDs which do not contain multiple angles. In some cases multiple angles are only recorded for specific scenes. • Check the "RATINGS" setting. • While the player is in the stop mode, hold the player's SKIP 9 button and the PLAY button down simultaneously and then hold the OPEN/CLOSE button down for longer than 3 seconds (until "INITIALIZE" disappears from the TV monitor). The lock will be released and all default settings and picture settings will return to the default values. • The disc does not play with the selected audio or subtitle language if that audio or subtitle language is not included on that DVD. • Set the "TV ASPECT" default setting to the proper setting for the connected TV. • Check the default setting for the disc language's menu language. 10~18 - 33, 36, 40, 41 14, 15 14, 15, 33, 35 42 - 43 - 26 - 66 64 38, 39 - 26~30 31 26, 27 • Check that the batteries are inserted in the proper "" directions. 21 • The batteries are dead. Replace them with new batteries. 21 Remote control unit does not operate. • Point the remote control unit at the remote control sensor when operating it. • Operate the remote control unit within a distance of 7 meters from the remote control 21 21 sensor. • Remove the obstacle between the remote control unit and remote control sensor. 21 70

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140

70
ENGLISH
Check again before assuming the player is malfunctioning
23
TROUBLESHOOTING
2
Are all the connections correct ?
2
Are you following the instructions in the manual ?
2
Are the amplifier and speakers operating properly ?
If the DVD-5900 does not seem to be functioning properly, check the table below. If this does not solve the problem, the DVD-5900 may
be damaged. Turn off the power, unplug the power cord from the power outlet, and contact your store of purchase or nearest Denon
sales office.
Symptom
Page
Check
Power does not turn on.
10~18,
20
Plug the power supply cord securely into the power outlet.
Playback does not start when PLAY
button is pressed.
Playback stops immediately.
8
9
Is there condensation on the disc or player ? (Let stand for 1 or 2 hours.)
Discs other than DVDs,SuperAudio CDs, video CDs and music CDs cannot be played.
Disc is dirty. Wipe off the dirt.
Picture does not appear.
10~18
47, 48
47, 48
Check the connections.
Check that VIDEO OUT has not been set to
VIDEO OFF
or
ALL OFF
for PURE
DIRECT MODE.
Set the TV
s input to
video
.
When the DVI connector output the signals, no progressive signals from the component
video connector.
If you wish to use the component video output, set to
DVI OFF
for DVI SETUP.
Sound is not produced or sound quality
is poor.
10~18
33, 36,
40, 41
14, 15
14, 15,
33, 35
Check the connections.
Properly set the input of the TV, stereo, etc.
Check the
DIGITAL OUT
and
COMPRESSION
settings.
Digital signals cannot be output with Super audio CDs. Use analog connections.
Area/layer of Super audio CD being played (CD/stereo/multi-channel) does not match
amplifier connections.
Menu playback of video CD
s is not
possible.
42
Menu playback is not possible with anything but video CDs with playback control.
Picture is disturbed during the search
operation.
Some disturbance is normal.
Buttons do not operate.
43
Some operations are disabled for some discs.
No subtitles are displayed.
26
Subtitles are not displayed for DVDs not containing subtitles.
Subtitles are turned off. Turn the subtitles setting on.
Audio (or subtitle) language does not
switch.
66
The audio (or subtitle) language does not switch for discs which do not include multiple
audio (or subtitle) languages.
For some discs the audio (or subtitle) language cannot be switched when the operation to
switch it is performed, but can be switched on the menu screens.
Angle does not switch.
64
The angle cannot be switched for DVDs which do not contain multiple angles. In some
cases multiple angles are only recorded for specific scenes.
Playback does not start when the title is
selected.
38, 39
Check the
RATINGS
setting.
The password for rating level has been
forgotten.
Reset all the setting to Factory
Preset.
While the player is in the stop mode, hold the player
s SKIP
9
button and the PLAY
button down simultaneously and then hold the OPEN/CLOSE button down for longer than
3 seconds (until
INITIALIZE
disappears from the TV monitor).
The lock will be released and all default settings and picture settings will return to the
default values.
The disc is not played with the audio or
subtitle language set as the default
setting.
26~30
The disc does not play with the selected audio or subtitle language if that audio or subtitle
language is not included on that DVD.
Picture is not displayed in 4:3 (or 16:9).
31
Set the
TV ASPECT
default setting to the proper setting for the connected TV.
Menu screen messages for the desired
language do not display.
26, 27
Check the default setting for the disc language
s menu language.
Remote control unit does not operate.
21
21
21
21
21
Check that the batteries are inserted in the proper
<
and
>
directions.
The batteries are dead. Replace them with new batteries.
Point the remote control unit at the remote control sensor when operating it.
Operate the remote control unit within a distance of 7 meters from the remote control
sensor.
Remove the obstacle between the remote control unit and remote control sensor.