Denon DVD 910 Owners Manual - Page 15

English PLAYING A DISC Basic Playback DVD-V CD Getting started • Turn on the power of the TV, amplifier and any other components which are connected to the DVD. • Make sure the TV and audio receiver (commercially available) are set to the correct channel. 1 Press the POWER ON button. • "P-ON" will appear briefly on the display panel. 2 Press the OPEN/CLOSE button to open disc loading tray. 3 Place the disc in the tray, with the label facing up. 4 Press the PLAY button. • The tray will close automatically, and playback will then start from the first chapter or track of the disc. If the playback does not start automatically, press the PLAY button. • When you playback the DVD with a title menu is recorded, it may appear on the screen. In this case, refer to "TITLE MENU". 5 Press the STOP button to stop playback. NOTES: • A "prohibited icon" may appear at the top-right on the TV screen during operation, warning that a prohibited operation has been encountered by the DVD player or the disc. • With DVDs that use some titles for playback program signals, playback may start from the second title, or it may skip these titles. • During the playback of two layered disc, pictures may stop for a moment. This happens when the 1st layer switches to the 2nd layer. This is not a malfunction. • During the playback of a DVD-RW which has been recorded in the VR mode, the sound or picture may freeze momentarily depended on disc content. General Features DVD may contain menus to navigate the disc and access special features. Press the appropriate numerical key or use the cursor buttons ( L/ K / B/ s ) to highlight your selection in the DVD main menu and press the ENTER button to confirm. NOTE: • Unless stated, all operations described are based on remote control use. Some operations can be carried out using the menu bar on the TV screen. Pause DVD-V CD 1 During playback, press the STILL/PAUSE button. • Playback will pause and sound will be muted. MP3 WMA F 2 To continue playback, press the PLAY button. Disc Menus DVD-V 1 Press the MENU button. • The DVD main menu will appear. 2 If the feature is not available, symbol may appear on the TV screen. 3 If disc menu is available on the disc, audio language, subtitle options, chapters for the title and other options will appear for selection. 4 Press the cursor buttons ( L/ K/ B/ s ) to select an item, and the ENTER button to confirm selection. Title Menu DVD-V 1 Press the TOP MENU button. • The title menu will appear. 2 If the feature is not available, symbol may appear on the TV screen. 3 Press the cursor buttons ( L/ K/ B/ s ) to select an item, and the ENTER button to confirm selection. • Playback will begin at the selected Title. CALLING UP A MENU SCREEN DURING PLAYBACK DVD-V • Press the MENU button to call up the DVD main menu. • Press the TOP MENU button to call up the title menu. NOTE: • Contents of menus and corresponding menu operations may vary between discs. Refer to the manual accompanying the disc for details. Brightness of the Front Display 1 Press the DIMMER button on the front panel to select the desired brightness of the front display. (Bright, Dim, or OFF) • "Bright" has been selected as the factory default. NOTE: • The brightness of the front display can be adjusted from the SETUP menu. Details are on page 24. Step by Step Playback 1 During playback, press the STILL/PAUSE button. • Playback will pause and sound will be muted. DVD-V F 2 The disc advances by one frame each time the STILL/PAUSE button is pressed. 3 To exit step by step playback, press the PLAY button. - 15 - EN