Home » Denon Manuals » Home Theater Systems » Denon S-301 » Manual Viewer

Denon S-301 Serial Protocol

Denon S-301 Manual

UPC - 081757506748

View all Denon S-301 manuals

Add to My Manuals
Save this manual to your list of manuals

Denon S-301 manual content summary:

Denon S-301 | Serial Protocol - Page 1
control protocol Application model :S-301 Application terminal : RS-232C Connector specification Connector type : DB-9pin female type, slave straight connection (DCE type) ( 1pin : GND , 2pin : TxD , 3pin : RxD , 5pin : Common(GND) , 4,6,7,8,9pin : NC ) Communication format : Synchronous system
Denon S-301 | Serial Protocol - Page 2
to a controller(Touch Panel etc.) from a system(AVR/AVC) if the 'request command' (COMMAND+?+CR(0x0D)) has came from a controller. The RESPONSE MV : Master Volume setting PW : system PoWer setting PARAMETER : ASCII CODE ( up to 25 characters) ex. DVD : function name CDR/TAPE-1 : function
Denon S-301 | Serial Protocol - Page 3
* is the meaning of 0x0D. SIDVD : Select Input source DVD MSTHX SURROUND EX : surround Mode Set to THX SURROUND EX MVUP : Master Volume UP PWON : system PoWer ON PWSTANDBY : system PoWer STANDBY SI? : Request command for now playing input source >> Return RESPONSE
Denon S-301 | Serial Protocol - Page 4
set to "50". D) Since SURROUND MODE changes simultaneously when the INPUT source changes, the SURROUND MODE (and also the value of the channel volume of all channels , It described in B) ) returns as EVENT. E) When SURROUND MODE is the same in between INPUT source change before and after, EVENT of
Denon S-301 | Serial Protocol - Page 5
COMMAND and PARAMETER list COMMAND PARAMETER function PW ON POWER ON/STANDBY change STANDBY MV UP MASTER VOLUME UP/DOWN , direct change to **dB DOWN ** **:00 to 99 by ASCII , 80=0dB, 99=---(MIN) CV FL UP CHANNEL VOLUME UP/DOWN , direct change to **dB FL DOWN ---FRONT Lch FL ** FR
Denon S-301 | Serial Protocol - Page 6
COMMAND CV MU SI ZM Z1 PARAMETER SB UP SB DOWN SB ** ON OFF PHONO CD TUNER DVD VDP TV DBS/SAT VCR-1 VCR-2 VCR-3 V.AUX CDR/TAPE1 MD/TAPE2 USB IPOD ON OFF PHONO | CDR/TAPE1 SOURCE UP DOWN ** ON OFF ---SURROUND BACKch function (SBch 1SP) **:00 to 99 by ASCII , 50=0dB
Denon S-301 | Serial Protocol - Page 7
as that of the time of SI COMMAND. SOURCE REC SELECT mode cancel SV DVD VIDEO SELECT mode set , and select source VDP TV DBS/SAT ---Select DBS -3805 SOURCE VIDEO SELECT mode cancel SD AUTO set DIGITAL INPUT AUTO mode PCM set DIGITAL INPUT force PCM mode DTS set DIGITAL INPUT force
Denon S-301 | Serial Protocol - Page 8
PL2x DOLBY DIGITAL DOLBY D EX DTS NEO:6 DTS SURROUND DTS ES DSCRT6.1 DTS ES MTRX6.1 DOLBY H/P DTS+DOLBY H/P HOME THX CINEMA THX5.1 THX U2 CINEMA THX MUSIC MODE THX6.1 THX SURROUND EX WIDE SCREEN 5CH STEREO 7CH STEREO SUPER STADIUM ROCK ARENA JAZZ CLUB CLASSIC CONCERT MONO MOVIE MATRIX VIDEO
Denon S-301 | Serial Protocol - Page 9
EQ:FRONT ROOM EQ:FLAT ROOM EQ:MANUAL ROOM EQ:OFF DELAY UP DELAY DOWN DELAY *** (3 digits) UP DOWN ****** (6 digits) UP DOWN **(PRESET No.) function --- PL2x mode --- PL can change ONLY DOLBY PL2 mode ROOM EQ mode direct change AUDIO DELAY UP/DOWN , direct change to ***ms ***:000 to 999 by ASCII ,
Denon S-301 | Serial Protocol - Page 10
180 function TUNER BAND , MODE Select ---Band set to AM ---Band set to FM ---Tuning mode set to AUTO mode ---Tuning mode set to MANUAL mode Sub-Woofer Crossover Frequency 80Hz / 120Hz / 150Hz / 180Hz TF, TP, TM COMMAND : '*' parameters can NOT operate when INPUT source isn't TUNER. example TMAM
Denon S-301 | Serial Protocol - Page 11
POWER ON/STANDBY change STANDBY MV ** MASTER VOLUME change , **:00 to 98 by ASCII 98 = +18dB(MAX) 80 = 0dB 00 = -80dB 99 = ---(MIN) CV FL ** CHANNEL change SI PHONO INPUT source change CD TUNER DVD VDP TV DBS/SAT ---Select ---Invalid at AVR-3805 USB IPOD - 11 - example PWON
Denon S-301 | Serial Protocol - Page 12
PHONO MULTI ZONE-2 source change Z2PHONO | ---The name of PARAMETER is | CD/TAPE1 the same as that of the time of SI COMMAND. Z2MD/TAPE2 PHONO REC SELECT source change SRPHONO | ---The name of PARAMETER is | CD/TAPE1 the same as that of the time of SI COMMAND. SRMD/TAPE2
Denon S-301 | Serial Protocol - Page 13
TF TP PARAMETER ****** (6 digits) **(PRESET No.) function TUNER Frequency change kHz at AM band ****.** MHz at FM band TUNER PRESET change to No.** TM TUNER BAND , MODE change AM ---Band set to AM FM ---Band set to FM AUTO ---Tuning mode set to AUTO mode MANUAL ---Tuning mode set to
Denon S-301 | Serial Protocol - Page 14
D +PL2x MUSIC DOLBY PRO LOGIC DOLBY PL2 CINEMA DOLBY PL2 MUSIC DOLBY PL2 GAME DOLBY PL2x CINEMA DOLBY PL2x MUSIC DOLBY PL2x GAME DOLBY DIGITAL DOLBY D EX DOLBY D +PL2x CINEMA DOLBY D +PL2x MUSIC function SURROUND mode change - 14 - example MSDIRECT MSPURE DIRECT MSSTEREO MSMULTI CH IN
Denon S-301 | Serial Protocol - Page 15
DTS ES MTRX6.1 DTS+PL2x CINEMA DTS+PL2x MUSIC DOLBY H/P DTS+DOLBY H/P HOME THX CINEMA THX5.1 THX U2 CINEMA THX MUSIC MODE THX6.1 THX SURROUND EX WIDE STEREO SUPER STADIUM ROCK ARENA JAZZ CLUB CLASSIC CONCERT MONO MOVIE MATRIX VIDEO GAME VIRTUAL MPEG2 AAC AAC+DOLBY EX AAC+PL2x CINEMA AAC+PL2x MUSIC
Denon S-301 | Serial Protocol - Page 16
EVENT PS CO PARAMETER ROOM EQ:NORMAL ROOM EQ:FRONT ROOM EQ:FLAT ROOM EQ:MANUAL ROOM EQ:OFF DELAY *** 080 120 150 180 Function ROOM EQ mode change AUDIO DELAY change, ***:000 to 999 by ASCII 000=0ms, 200=200ms ---AVR5805 can be operated from 0 to 200 Sub-Woofer Crossover Frequency 80Hz
Denon S-301 | Serial Protocol - Page 17
**## :start time(**=00~23hours,##=00~59minutes by ASCII) $$%% :stop time($$=00~23hours,%%=00~59minutes by ASCII) [F]:Function (2bytes by ASCII) PH PHONO PLAY CD CD PLAY DV DVD PLAY TU TUNER PLAY VD VDP PLAY TV TV PLAY DB DBS/SAT PLAY V1 VCR-1 PLAY V2 VCR-2 PLAY V3 VCR-3 PLAY VA
Denon S-301 | Serial Protocol - Page 18
COMMAND PARAMETER function example Rcv? TI @**## TIME SET TIA0730 @:A or P or 2(A:AM,P:PM,2:24hour by ASCII) TI21930 **## :now time(**=00~23hours,##=00~59minutes by ASCII) - 18 -
Denon S-301 | Serial Protocol - Page 19
ASCII) **## :start time(**=00~23hours,##=00~59minutes by ASCII) $$%% :stop time($$=00~23hours,%%=00~59minutes by ASCII) [F]:Function (2bytes by ASCII) PH PHONO PLAY CD CD PLAY DV DVD PLAY TU TUNER PLAY VD VDP PLAY TV TV PLAY DB DBS/SAT PLAY V1 VCR-1 PLAY V2 VCR-2 PLAY V3 VCR-3 PLAY VA
Denon S-301 | Serial Protocol - Page 20
EVENT PARAMETER function example Rcv? TI @**## TIME SET TIA0730 @:A or P or 2(A:AM,P:PM,2:24hour by ASCII) TI21930 **## :now time(**=00~23hours,##=00~59minutes by ASCII) When time is not set, the **## equal "----" TIA---- TI2---- - 20 -
Denon S-301 | Serial Protocol - Page 21
DVD menu stored on the disc (MENU) return to the previous menu screen (RETURN) switch forward the audio stream (AUDIO) switch backward the audio stream (AUDIO) get the audio move the highlight area ( ) select the item selected with the cursor buttons(ENTER) example D@ DA DB DC+ DC-<
Denon S-301 | Serial Protocol - Page 22
Video Setup of DVI select the HDMI/DVI Video Setup of OFF get the HDMI/DVI Video Setup information DO1 DO2 DO3 DO? DP1 DP2 DP3 DP4 DP? DQ1 DQ2 DQ3 DQ4 DQ? D0 ? D1 ? D2 ? Acquire system status Acquire software Version Acquire DVD
Denon S-301 | Serial Protocol - Page 23
EVENT(or RESPONSE) and PARAMETER list for DVD Function EVENT D@ DA DB DC PARAMETER ** ### DD 1 2 3 4 5 6 7 8 9 : ; < = > ? @ A B C D E F G function disk playback starts (PLAY) disk playback stops (STOP) pause to play disc (PAUSE) Change the playback track
Denon S-301 | Serial Protocol - Page 24
(TOP MENU) display the DVD menu stored on the disc (MENU) return to the previous menu screen (RETURN) change the audio stream channel (AUDIO) [1] current audio stream channel(1-8 by ASCII) [2] total audio stream channel (1-8 by ASCII) [3] audio format 1 Dolby Digital 2 DTS 3 MPEG 4 LPCM
Denon S-301 | Serial Protocol - Page 25
buttons select the 2ch layer of SACD select the multi ch layer of SACD select the CD layer of SACD select the HDMI/DVI format of AUTO select the HDMI/DVI format of 480/576P select the HDMI/DVI format of 720P select the HDMI/DVI format of 1080I select the HDMI/DVI Video Setup of HDMI
Denon S-301 | Serial Protocol - Page 26
EVENT PARAMETER function example Send? - 26 -
Denon S-301 | Serial Protocol - Page 27
) function DVD player's status information [1] Disc type code 1 DVD VIDEO 2 3 VCD 4 5 MP3 6 7 SACD [2] Audio format code 1 DOLBY DIGITAL 2 3 MPEG 4 5 PPCM 6 7 DSD [3] Audio Channel code 1 1ch 2 3 2.1ch 4 5 3.1ch 6 7 4.1ch 8 9 5.1ch : ; L/R(CD/VDC/MP3) < = L(CD/VDC/MP3
Denon S-301 | Serial Protocol - Page 28
Angle code 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 [7] Status code 0 Stand-by 1 Disc Loading 2 Disc Loading Complete 3 Tray Open 4 Tray Close A No Disc B Stop C Play D Pause E Scan Play F Slow Scan Play G Setup H Play Back Control I DVD Resume Stop J DVD Menu [8] Play mode code
Denon S-301 | Serial Protocol - Page 29
(seconds,00-59 by ASCII) [21] HDMI Format 1 AUTO 2 480/576P 3 720P 4 1080I [22] DVI/HDMI Video Setup 1 HDMI Y Cb Cr 2 HDMI R G B 3 DVI 4 OFF software version information [1]~[6] SYSTEM uCOM version (6 figure) [7]~[12] DSP version (6 figure) [13]~[18] DVD F/E version (6 figure) [19]~[24
Denon S-301 | Serial Protocol - Page 30
EVENT PARAMETER D2 [1][2] function [1] 1st error code (0x20 to 0x2D by binary) [2] 2nd error code (0x00 by binary) Error code No. 1st 2nd detail 1 0x20 0x00 Loading error 2 0x21 0x00 Loading switch error 3 0x22 0x00 Focus servo error 4 0x23 0x00 Tracking servo error 5 0x24 0x00 Cannot
Denon S-301 | Serial Protocol - Page 31
the playback mode to repeat RETURN change the browse mode and remote mode (iPod only) DISPLAY change the display mode 0 direct search of 0 "EX "command should be repeated every 100ms to 160ms for as long as both buttons are held down. - 31 - example EXPLAYPAUSE EXPLAY EXPAUSE
Denon S-301 | Serial Protocol - Page 32
EVENT(or RESPONSE) and PARAMETER list for iPod or USB Function COMMAND EX PARAMETER RCV NO RCV Function receive to the AMX command of iPod or USB no receive to the AMX command of iPod or USB example EXRCV EXNO RCV Receive? - 32 -