Denon S32 Owners Manual - English - Page 24
Alarm Setting - reset
UPC - 883795000161
View all Denon S32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Getting Started Connections Setup Playback Information Troubleshooting ENGLISH Advanced Operation DIMMER SLEEP DISPLAY ENTER SLEEP DISPLAY Alarm Setting Set the alarm time, source and volume. 1 Press to set the alarm. 2 GAlarm number selectionH Turn to select "ALARM1" or "ALARM2", then press ENTER. The time display flashes. 3 GAlarm time settingH Select time with , then press ENTER to set. b Turn clockwise to increment the set value, and counterclockwise to decrement it. 4 GAlarm source settingH Select alarm source with , then press ENTER to set. 5 GAlarm volume level settingH Select alarm volume level with , and press ENTER to set. 6 Press or , and set the alarm on. • When the input source is "Internet Radio", "PC Music", or "iPod", if music does not play when the alarm on time is reached, a Beep will sound. • Alarms 1 and 2 operate separately. • If the set is not operated for 60 minutes after alarm playback starts, playback stops and the power turns off (The Beep sound stops after 5 minutes). • When you want alarm playback of an iPod recording, set iPod while pausing the track you want to play. n Pausing alarm playback (snooze function) Press during alarm playback. Alarm playback resumes 5 minutes after it was stopped. n Stopping alarm playback Either press or on the main unit to turn the alarm off, or press the main unit's . If there is a power failure n When connected to a network When the power comes back on, the set automatically connects to an SNTP (Simple Network Time Protocol) server and the current time is adjusted automatically. Once the zone, daylight saving time and alarm time have been set, they are stored in the memory, so there is no need to set them again. n When unconnected to a network When the power comes back on, the clock resumes from the time the power turned off. If the time is way off, turn the power on and reset the current time. If the alarm time has been set, it is stored in the memory, so there is no need to set it again. ENTER DIMMER About the button names in these explanations < > : Buttons on the main unit [ ] : Buttons on the remote control unit Button name only: Buttons on the main unit and remote control unit 20