Denon TU-604CI Serial Protocol - Page 4
Command, Event, Response, Command+? - receivers
UPC - 883795000208
View all Denon TU-604CI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
29.May.2008 Protocol specification The following three data forms are defined. COMMAND ɹ: The message sent to a system(AVR) from a controller(Touch Panel etc.) A command to a system is given from a controller. EVENT : The message sent to a controller (Touch Panel etc.) from a system (AVR) The result is sent, when a system is operated directly and a state changes. *The form of EVENT presupposes that it is the same as that of COMMAND . **Refer to the following table for the contents of COMMAND and EVENT . RESPONSE : The message sent to a controller (Touch Panel etc.) from a system (AVR) if the 'request command' ( COMMAND+? +CR (0x0D)) has came from a controller. The RESPONSE should be sent within 200ms of receiving the COMMAND . *The form of RESPONSE presupposes that it is the same as that of EVENT . Basic specification: The command by ASCII CODE, parameter expression *ASCII CODE which can be used is from 0x20 to 0x7F: the alphabet and the number of 0-9, and space (0x20), some signs, AND carriage return (0x0D) --- It is used only as a pause sign. Command structure: COMMAND + PARAMETER + CR (0x0D) COMMAND: ASCII CODE of 2 characters Ex. SI : Select Input source MS : surround Mode Setting MV : Master Volume setting PW : system PoWer setting PARAMETER : ASCII CODE (up to 25 characters) Ex. DVD : function name SUPER STADIUM : surround mode name *Special Parameter--- ? : for request command 4/17