Dewalt DCGG570K Instruction Manual - Page 18

Accessories, Repairs, Register Online

Get Dewalt DCGG570K PDF manuals and user guides View all Dewalt DCGG570K manuals
Add to My Manuals
Save this manual to your list of manuals

Page 18 highlights

English 3. Reinstall the ball (CC), the spring (DD), and then the disc (EE). 4. After all grease is cleaned from the area, reinstall the check valve plug (BB). Cleaning Contamination from the Filter (Fig. 2, 12) Should the grease gun fail to dispense FIG. 12 grease, clean the filter (V). NOTE: If there is still grease in the tube, open the purge valve prior to pulling the tube handle. 1. Pull the grease tube handle (L) out as far as it will go, then secure V the grease tube rod (M) into the retaining slot (O) by moving the rod to the side. Ensure the rod is placed securely in the slot to prevent it from disengaging. 2. Unscrew the grease tube assembly (N) from the grease gun and remove. 3. Using a small flat-blade screwdriver or pick, carefully pop out the filter. 4. Wipe off the filter using a soft cloth. If the filter still has debris in it after wiping, a soft brush or swab may be used. 5. Once clean, reinsert the filter into the round groove, ensuring it is fully seated, and reattach the grease tube assembly to the grease gun. Accessories WARNING: Since accessories, other than those offered by DEWALT, have not been tested with this product, use of such accessories with this tool could be hazardous. To reduce the risk of injury, only DEWALT recommended accessories should be used with this product. WARNING: Extreme pressure may cause nozzle extension or flexible hose to burst. Use only DEWALT approved hoses and follow flexible hose instructions and warnings. Recommended accessories for use with your tool are available at extra cost from your local dealer or authorized service center. If you need assistance in locating any accessory, please contact DEWALT Industrial Tool Co., 701 East Joppa Road, Baltimore, MD 21286, call 1-800-4-DEWALT (1-800-433-9258) or visit our website: www.dewalt. com. ACCESSORIES DCGG5701 1/8" NPT Grease Gun Coupler DCGG5701-3 1/8" NPT Grease Gun Coupler 3-pak DCGG5702 Right Angle Grease Gun Coupler DCGG5703-42 1/8" NPT Grease Gun Hose Assembly (42") (107 mm) DCGG5703-24 1/8" NPT Grease Gun Hose Assembly (24") (61 mm) DCGG5704 Clear Grease Gun Cartridge Tube Repairs The charger and battery pack are not serviceable. To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment (including brush inspection and replacement) should be performed by a DEWALT factory service center, a DEWALT authorized service center or other qualified service personnel. Always use identical replacement parts. Register Online Thank you for your purchase. Register your product now for: • WARRANTY SERVICE: Registering your product will help you obtain more efficient warranty service in case there is a problem with your product. 16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
3. Reinstall the ball (CC), the spring (DD), and then the disc (EE).
4. After all grease is cleaned from the area, reinstall the check valve
plug (BB).
Cleaning Contamination from the Filter (Fig. 2, 12)
Should the grease gun fail to dispense
FIG. 12
V
grease, clean the filter (V).
NOTE:
If there is still grease in the tube,
open the purge valve prior to pulling the
tube handle.
1. Pull the grease tube handle (L) out
as far as it will go, then secure
the grease tube rod (M) into the
retaining slot (O) by moving the rod
to the side. Ensure the rod is placed
securely in the slot to prevent it from
disengaging.
2. Unscrew the grease tube assembly (N) from the grease gun and
remove.
3. Using a small flat-blade screwdriver or pick, carefully pop out the
filter.
4. Wipe off the filter using a soft cloth. If the filter still has debris in it
after wiping, a soft brush or swab may be used.
5. Once clean, reinsert the filter into the round groove, ensuring it is
fully seated, and reattach the grease tube assembly to the grease
gun.
Accessories
WARNING:
Since accessories, other than those offered by D
E
WALT,
have not been tested with this product, use of such accessories with
this tool could be hazardous. To reduce the risk of injury, only D
E
WALT
recommended accessories should be used with this product.
WARNING:
Extreme pressure may cause nozzle extension or
flexible hose to burst. Use only D
E
WALT approved hoses and follow
flexible hose instructions and warnings.
Recommended accessories for use with your tool are available at
extra cost from your local dealer or authorized service center. If you
need assistance in locating any accessory, please contact D
E
WALT
Industrial Tool Co., 701 East Joppa Road, Baltimore, MD 21286, call
1-800-4-D
E
WALT (1-800-433-9258) or visit our website: www.dewalt.
com.
ACCESSORIES
DCGG5701
1/8" NPT Grease Gun Coupler
DCGG5701-3
1/8" NPT Grease Gun Coupler 3-pak
DCGG5702
Right Angle Grease Gun Coupler
DCGG5703-42
1/8" NPT Grease Gun Hose Assembly (42") (107 mm)
DCGG5703-24
1/8" NPT Grease Gun Hose Assembly (24") (61 mm)
DCGG5704
Clear Grease Gun Cartridge Tube
Repairs
The charger and battery pack are not serviceable.
To assure product SAFETY and RELIABILITY, repairs, maintenance
and adjustment (including brush inspection and replacement) should
be performed by a D
E
WALT factory service center, a D
E
WALT
authorized service center or other qualified service personnel. Always
use identical replacement parts.
Register Online
Thank you for your purchase. Register your product now for:
•
WARRANTY SERVICE:
Registering your product will help you
obtain more efficient warranty service in case there is a problem
with your product.
English
16