Dewalt DCS374P2 Instruction Manual - Page 18
Tips for Better Cutting
![]() |
View all Dewalt DCS374P2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
English band saw blade. To obtain maximum service life of the band saw blade, ensure there is no sudden impact at the beginning of the cutting operation. 4. As shown in Figure 11, FIG. 11 straight cutting can be accomplished by keeping the band saw blade aligned with the side surface of the motor housing. Any twisting or cocking of the blade will cause the cut to go offline and decrease the life of the blade. NOTICE: During cutting, if the band saw becomes locked or jammed in the workpiece material, release the switch immediately to avoid damage to the band saw blade and motor. 5. The tool's own weight provides the most efficient downward cutting pressure. Added operator pressure slows the blade and reduces blade life. 6. End pieces, which would be heavy enough to cause injury when they drop, after cut-off, should be supported. Safety shoes are strongly recommended. End pieces may be hot and sharp. 7. Whenever possible, hold the saw firmly in both hands. 8. DO NOT MAKE ANY SPEED CHANGES UNLESS TOOL HAS BEEN TURNED OFF. FIG. 12 RECOMMENDED CUTTING POSITIONS YES NO YES NO YES NO YES NO YES NO YES NO Tips for Better Cutting The following recommendations should be used as a guide (refer to Figure 12). Results may vary with the operator and the particular material being cut. 16
![](/manual_guide/products/dewalt-dcs374p2-instruction-manual-91f0ea6/18.png)