Dewalt DWE43244N Instruction Manual - Page 8
Motor, Components Fig. - rpm
View all Dewalt DWE43244N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
English V volts or AC/DC..... alternating or Hz hertz direct current min minutes Class II or DC....... direct current Construction Class I Construction (double insulated) (grounded) no no load speed .../min per minute n rated speed BPM beats per minute earthing terminal IPM impacts per minute RPM revolutions per minute sfpm surface feet per safety alert symbol visible radiation wear respiratory protection minute wear eye SPM strokes per minute A amperes W watts or AC alternating current protection wear hearing protection read all documentation Lanyard Connection (Fig. B) DWE43214N, DWE43244N, DWE43214NVS Safety Warnings Specific for Use At Height WARNING: If the tool is dropped for any reason the lanyard connection must be inspected and properly serviced prior to re-use. The lanyard connection is designed to stretch to absorb the shock of a drop. Any permanent stretch to the connection exposing the red marked internal coils indicates it has been compromised and must be serviced prior to reuse. • Always keep the tool and accessories tethered when working "at height". [Maximum lanyard length: 6 ft (2m)] • Use only with lanyards appropriate for this tool type and rated for at least 15 lbs (6.8 Kg). • Crush, cut or entanglement hazard. Do not use near moving parts, mechanisms or running machinery. • Do not anchor the tool lanyard to anything on your body. Anchor to a rigid structure that can withstand the forces of a dropped tool. • Make sure the lanyard is properly secure at each end prior to use. • Inspect tool and lanyard before each use for damage and proper function (including fabric and stitching). Do not use if damaged or not functioning properly. • Do not alter the lanyard connection or use in a manner other than as instructed in this manual. • Only attach tool to a lanyard with a locking carabiner. Do not attach by looping or knotting the lanyard. Do not use rope or cord. • Electrical shock hazard. Be sure power is off when working in high voltage areas. Some lanyards are conductive. • Dropped tools will swing on the lanyard, which could cause injury or loss of balance. • Do not carry the tool by attachment device or the lanyard. • Do not attach more than one tool to each lanyard. • Only use appropriate DeWALT brand attachment point. NEVER modify tools to create attachment points. 6 • Only transfer the tool between hands while properly balanced in a stable orientation. • Do not attach lanyards to tool in a way that keeps guards, switches or lock-offs from operating properly. • Avoid getting tangled in the lanyard. • Keep lanyard away from the cutting area of the tool. • Do not use lanyards or attachment devices to get additional leverage from the tool. • Do not use for personal fall protection. • Falling object hazard! Only change accesories and attachments where a dropped object won't cause a hazard below you. Consult your AHJ or site supervisor for procedures for working at height. • Use multi-action and screw gate type carabineers. Do not use single action spring clip carabineers. The lanyard connection 11 is intended for use by competent personnel, who are trained and knowledgeable regarding working with tools in and around machinery and "at height". Fig. B 11 SAVE THESE INSTRUCTIONS FOR FUTURE USE Motor Be sure your power supply agrees with the nameplate marking. Voltage decrease of more than 10% will cause loss of power and overheating. DeWALT tools are factory tested; if this tool does not operate, check power supply. COMPONENTS (FIG. A) WARNING: Never modify the power tool or any part of it. Damage or personal injury could result. Refer to Figure A at the beginning of this manual for a complete list of components. Intended Use Your heavy-duty small angle grinder has been designed for professional grinding, sanding, wire brush, surface finishing, and cut-off applications at various work sites (i.e., construction sites). DO NOT use under wet conditions or in presence of flammable liquids or gases. Your heavy-duty small angle grinders is a professional power tool. DO NOT let children come into contact with the tool. Supervision is required when inexperienced operators use this tool.