Dewalt DWMIIIFS Instruction Manual - Page 2

Table of Contents Safety Instructions 3 Operation 5 Maintaince 7 Trouble Shooting Guide 10 Français 12 Español 24 WARNING: BEFORE OPERATING THIS TOOL, ALL OPERATORS SHOULD STUDY THIS MANUAL TO UNDERSTAND AND FOLLOW THE SAFETY WARNINGS AND INSTRUCTIONS. KEEP THESE INSTRUCTIONS WITH THE TOOL FOR FUTURE REFERENCE. IF YOU HAVE ANY QUESTIONS, CONTACT YOUR DeWALT REPRESENTATIVE OR DISTRIBUTOR. Definitions: Safety Guidelines The definitions below describe the level of severity for each signal word. Please read the manual and pay attention to these symbols. DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. NOTICE: Indicates a practice not related to personal injury which, if not avoided, may result in property damage. Introduction DeWALT tools are precision-built tools, designed for precise, high volume nailing. These tools will deliver efficient, dependable service when used correctly and with care. As with any fine power tool, for best performance the manufacturer's instructions must be followed. Please study this manual before operating the tool and understand the safety warnings and cautions. The instructions on installation, operation and maintenance should be read carefully, and the manual kept for reference. NOTE: Additional safety measures may be required because of your particular application of the tool. Contact your DeWALT representative or distributor with any questions concerning the tool and its use. DeWALT Industrial Tool Co., 701 East Joppa Road, Towson, MD 21286, call 1-800-4-DeWALT (1-800-433-9258) or visit our website www.dewalt.com. NOTE: DeWALT tools have been engineered to provide excellent customer satisfaction and are designed to achieve maximum performance when used with fasteners engineered to the same exacting standards. DeWALT cannot assume responsibility for product performance if our tools are used with fasteners or accessories not meeting the specific requirements established for fasteners, staples and accessories. 2- ENG