Dirt Devil M085807HD Revision 1 (3/2004) - Page 11

If Obstruction Develops During Floor Cleaning, Obstruction Develops During Above Floor Cleaning

Get Dirt Devil M085807HD PDF manuals and user guides View all Dirt Devil M085807HD manuals
Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

This cleaner uses a common automotive lamp #906,13.0 volts. For bulb replacement call 1-800-3211134 or your local auto paris store. TOOL REQUIRED: PHILLIPS OR FLATHEAD SCREWDRIVER Depress latch to remove dirt container from cleaner. Remove the two (2) screws located on the inside of the (Diagram 1). Remove lens (Diagram l a ) . Pull bulb out of socket to remove. Do NOT twist. Gently push new bulb into socket to replace. Replace lens. Secure the headlight lens by replacing the two (2) screws. IF OBSTRUCTION DEVELOPS DURING FLOOR CLEANING: 1. If obstruction develops while cleaning carpets, turn cleaner OFF and unplug. Check to see if dirt cup is full (Diagram 1); empty if needed (Page 9). 2. Check dirt path window and lower hose (Diagram 2). Remove any obstruction. 3. Turn cleaner over and remove nozzle guard (Diagram 3). Clear any obstruction that occurs in or around the brushroll area. IF OBSTRUCTION DEVELOPS DURING ABOVE FLOOR CLEANING: 1. If obstruction develops while above floor cleaning, turn cleaner OFF and unplug. Check to see if dirt cup is full; empty if needed (Page 9). 2. Check airflow areas of hose (Diagram 4). If there is no suction, disconnect hose. drop quarter through end. If quarter comes out, there is NO blockage.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
This cleaner uses a common automotive lamp #906,13.0 volts. For bulb replacement call 1-800-321-
1134 or your local auto paris store.
TOOL REQUIRED: PHILLIPS OR FLATHEAD SCREWDRIVER
Depress latch to remove dirt container
Pull bulb out of socket to
Replace lens. Secure the
from cleaner. Remove the two (2) screws
remove.
Do NOT twist.
headlight lens by replacing
located on the inside of the (Diagram 1).
Gently push new bulb into
the two (2) screws.
Remove lens (Diagram la).
socket to replace.
IF OBSTRUCTION DEVELOPS DURING FLOOR CLEANING:
1.
If obstruction develops while cleaning carpets,
turn cleaner OFF and unplug.
Check to see if dirt cup is full
(Diagram
1);
empty if needed (Page 9).
2. Check dirt path window and lower hose (Diagram 2). Remove any obstruction.
3. Turn cleaner over and remove nozzle guard (Diagram 3). Clear any obstruction that occurs in or around
the brushroll area.
IF
OBSTRUCTION DEVELOPS DURING ABOVE FLOOR CLEANING:
1. If obstruction develops while above floor cleaning,
turn cleaner OFF and unplug.
Check to see if dirt cup
is full; empty if needed (Page 9).
2. Check airflow areas of hose (Diagram
4).
If there is no suction, disconnect hose. drop quarter through end. If
quarter comes out, there is NO blockage.