Dymo 15517 User Guide - Page 10

To serialize your labels 1. Enter the text for your label. 2. Use the arrow keys to move the cursor under the letter or number to serialize. 3. Press . SERIAL 4. Enter the number of labels you wish to print and press or Print to begin printing. Enter 1-99 for numbers and 1-26 for letters. To print multiple copies of the same serialized label, choose + Print and enter the number of copies of each label to print. See Printing Multiple Copies on page 9. Adjusting Print Quality (Advanced) Depending on the label material you choose, you may need to lighten or darken the print on the label. Adjusting the print head temperature allows you to control the print quality (+/- 20). To set the print head temperature 1. Press + SAVE . 2. Use the arrow keys to select the print head temperature and press . 3. Repeat as necessary until you are satisfied with the print quality. Cleaning Your Printer Your printer is designed to give you long and trouble-free service, while requiring very little maintenance. Clean your printer from time to time to keep it working properly. Clean the cutter blade each time you replace the tape cassette. To clean the cutter blade 1. Remove the tape cassette. 2. Press and hold down the cutter lever to expose the cutter blade. 3. Use a cotton ball and alcohol to clean both sides of the blade. 4. Release the cutter lever. To clean the print head ➤ Clean the print head using the cleaning tool located inside the tape compartment lid. RhinoPRO Label Cassettes The following industrial label cassettes are available for the RhinoPRO 5000 printer. Material Type 3/8" 1/2" 3/4" (9 mm) (12 mm) (19 mm) Length Flexible Nylon White - 18488 18489 11.5' (3.5 m) Flexible Nylon Yellow - 18490 18491 11.5' (3.5 m) Permanent Polyester White 18482 18483 18484 18.0' (5.5 m) Permanent Polyester Metallic 18485 18486 18487 18.0' (5.5 m) 10