Dymo 18134 User Guide - Page 8

LM150 WEUdef.qxd 23-09-2003 16:07 Pagina 8 Adjusting the Print Contrast You can adjust the print contrast to fine tune the print quality of your label. To set the contrast 1. Press Extra. 2. Use the arrow keys to select Set Contrast and press OK. 3. Use the arrow keys to select one of the five contrast settings and press OK. Caring for Your Labelmaker Your labelmaker is designed to give you long and trouble-free service, while requiring very little maintenance. Cleaning the Labelmaker Clean your labelmaker from time to time to keep it working properly. To clean the cutter blade 1. Remove the tape cassette. 2. Insert the tip of a ball-point pen or pencil between the L-shaped piece and the guide pin. Insert tip of pen or pencil Press and hold cutter 4. Use a cotton ball and alcohol to clean both sides of the blade. 5. Release the cutter lever. To clean the print head Wipe print head clean using the cleaning tool located inside the tape compartment lid. DYMO D1 label cassettes Width: Length: Black/Clear Blue/Clear Red/Clear Black/White Blue/White Red/White Black/Blue Black/Red Black/Yellow Black/Green White/Clear White/Black Black/Silver Black/Gold Black/Fluo Green Black/Fluo Red Flexible Nylon Perm. Polyester 6mm (1/8") 7m 43610 43613 43618 9mm (1/4") 7m 40910 40913 40914 40915 40916 40917 40918 40919 12mm (1/2") 7m 45010 45011 45012 45013 45014 45015 45016 45017 45018 45019 45020 45021 45022 45023 45024 45025 16957 16959 UK Adapter European Adapter 40075 40076 Figure 9 3. Press and hold down the cutter lever to expose the cutter blade. 8