Dymo LabelManager® 210D User Guide - Page 6
Connecting the Optional Power Adapter, Inserting the Tape Cassette
View all Dymo LabelManager® 210D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Connecting the Optional Power Adapter An optional 9 Volt, 1.5 A power adapter can also be used to power the label maker. Connecting the AC adapter to the label maker disconnects the batteries as a power source. To connect the power adapter 1. Plug the power adapter into the power connector on the top, left side of the label maker. 2. Plug the other end of the power adapter into a power outlet. Ç Make sure the label maker power is turned off before you disconnect the power adapter from the main power source. Otherwise, your most recent memory settings will be lost. Figure 3 Inserting the Tape Cassette Guideposts Your label maker comes with one tape cassette. Visit www.dymo.com for information about purchasing additional tape cassettes. Remove cardboard insert Figure 4 To insert the tape cassette 1. Lift the tape cassette cover to open the tape compartment. See Figure 3. Click! Ç Before using the label maker for the first time, remove the protective cardboard insert from the tape exit slot. See Figure 4. 2. Insert the cassette with the label facing up and positioned between the guideposts. 3. Press firmly until cassette clicks into place. See Figure 5. Click! Figure 5 4. Close the tape cassette cover. 6