Dymo LabelManager® 450 User Guide 1 - Page 3
About Your New Labelmaker, Getting Started
View all Dymo LabelManager® 450 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
About Your New Labelmaker With your new DYMO ExecuLabel™ LM450 labelmaker, you can create a wide variety of highquality, self-adhesive labels. You can choose to print your labels in many different sizes and styles. The labelmaker uses DYMO D1 label cassettes in widths of 1/4" (6 mm), 3/8" (9 mm), 1/2" (12 mm), 3/4" (19 mm), or 1" (24 mm). Label cassettes are also available in a wide range of materials. Visit www.dymo.com for information on obtaining labels and accessories for your labelmaker. Warranty Registration Please complete the warranty registration card and return it to the appropriate Customer Support address within seven days of purchase. Visit www.dymo.com/registration for details. Getting Started Follow the instructions in this section to print your first label. Connecting the Power The labelmaker can operate on AC or battery power. To save power, the labelmaker will automatically turn off after two minutes of inactivity. Inserting the Batteries The labelmaker uses six 1.5 volt high-capacity AA alkaline batteries. To insert the batteries 1. Remove the battery compartment cover. See Figure 2. US AUS NZ Figure 2 2. Insert the batteries following the polarity markings (+ and -). 3. Replace the battery compartment cover. Remove the batteries if the labelmaker will not be used for a long period of time. Connecting the Power Adapter An optional AC power adapter can also be used to power the labelmaker. Connecting the power adapter to the labelmaker disconnects the batteries as a power source. To connect the power adapter 1. Plug the power adapter into the power connector on the top, left side of the labelmaker. 2. Plug the other end of the power adapter into a power outlet. Make sure the labelmaker power is turned off before you disconnect the power adapter from the main power source. Otherwise, your most recent memory settings will be lost. Inserting the Label Cassette Your labelmaker comes with one DYMO D1 label cassette. Visit www.dymo.com for information about purchasing additional label cassettes. 3