Dymo LabelWriter® SE450 Label Printer Technical Reference - Page 39
GS A Starting Position of Bar Code, GS DC2 Set Font to Double Height, Description, Expression
View all Dymo LabelWriter® SE450 Label Printer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Commands None GS A Starting Position of Bar Code Description Defines the distance from the left where the first barcode will print. The distance is represented in n/203 inch (dot) increments. This command is used to center a barcode on a text line. Expression ASCII GS A n1 n2 Decimal 29 65 n1 n2 Hex 1D 41 n1 n2 Parameters n1 the most significant byte n2 the least significant byte Inches/203 = (n1 * 256) + n2 Length # of Dots n1 n2 0.5 102 0 102 1.0 203 0 203 2.0 406 1 150 3.0 609 2 97 GS DC2 Set Font to Double Height Description Causes the current font to be printed at twice its normal height. The double-height setting will remain in effect until the current line attributes are cleared See Also 33
Commands
None
GS A Starting Position of Bar Code
Description
Defines the distance from the left where the first barcode will print. The distance is
represented in
n
/203 inch (dot) increments. This command is used to center a barcode
on a text line.
Expression
ASCII
GS A
n1 n2
Decimal
29 65
n1 n2
Hex
1D 41
n1 n2
Parameters
n1
the most significant byte
n2
the least significant byte
Inches/203 = (
n1
* 256) +
n2
Length
# of Dots
n1
n2
0.5
102
0
102
1.0
203
0
203
2.0
406
1
150
3.0
609
2
97
GS DC2 Set Font to Double Height
Description
Causes the current font to be printed at twice its normal height. The double-height
setting will remain in effect until the current line attributes are cleared
See Also
33