Dymo LabelWriter 450 Duo Label Printer Technical Reference - Page 12
Power Requirements, AC Adapter, PCB Input Power - label printer driver
View all Dymo LabelWriter 450 Duo Label Printer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Power Requirements The LabelWriter 450 series printers are normally supplied with an external, universal (100 - 240 VAC) AC power adapter. For OEM applications, a DC voltage can also be supplied to the main printed circuit board (PCB) of the printer using the JP2 connector. Note: The printers have been tested and certified for EMC and safety requirements using the supplied AC adapter. Supplying a non-DYMO power source may change the EMC and safety certifications. Input power is variable based on the amount of information printed and the duty cycle of the label printing. The ratings below are based on normal printer usage, except where specified. The printer driver (print commands from the host computer) controls some printing parameters and will change maximum power usage. AC Adapter DYMO part number Input voltage Output voltage 93447 (60 W) 100 - 240 VAC, 50/60 Hz, 1.6 Amps 24 VDC, 2.5Amps PCB Input Power All LabelWriter 450 series printers have an input voltage of 24 VDC, +/- 5%. Their power requirements are as follows. LabelWriter 450 and 450 Turbo Printers Input current (idle) Input current (typical) Input current (max.) 0.040 Amps 1.75 Amps 3.3 Amps based on printing a shipping label (30256) with a maximum-size filled rectangle, after print head temperature increases above ambient temperature. At nominal print head temperature: 2.7 A In graphics mode: 1.6 A LabelWriter 450 Series Technical Reference Manual Page 12