Dynex DX-24E150A11 User Manual (English) - Page 17

Adjusting the sound DX-24E150A11 13 Note: You can also press PICTURE on the remote control to select the picture mode. • Brightness-Adjusts the brightness. • Contrast-Adjusts the contrast. • Color-Adjusts the color saturation. • Tint-Adjusts the image tint. • Sharpness-Adjusts the sharpness. 3 Press or to highlight Advanced Video, then press ENTER to enter the sub-menu. 4 Press or to adjust the option. You can select: • Aspect Ratio- Selects the aspect ratio of the picture. You can select: • Auto (selects the correct aspect ratio automatically. Available only when Auto Zoom is turned ON). • Normal (selects the correct aspect ratio to match the source image). • Zoom (enlarges the picture but may crop the top and bottom). • Wide (shows a full-screen picture). • Cinema (stretches the picture at the edges, but maintains a good aspect ratio at the center of the screen). • Overscan-Extends part of the display past the visible area of the screen. The resulting picture will "zoom in" on the center of the image. Turn this On to adjust the picture's reproduction rate. • Color Temperature-Selects the color temperature. You can select Warm (to enhance the reds), Cool (to enhance the blues), or Normal. • Noise Reduction-Selects the noise reduction mode to reduce picture noise (snow). You can select Low, Middle, High, or Off. • Backlight-Adjusts the screen backlight. • Adaptive Contrast-Turn this On to optimize the picture display for a more vivid image. • Dynamic Contrast Ratio-Enhances the contast ratio between the light and dark areas of the picture. This feature enables automatic contrast adjustment, based on the picture brightness. 5 Press MENU to return to the previous menu, or press EXIT to close the menu. Adjusting the computer image Note: Make sure that your TV is in VGA mode. For more information, see "Selecting the video input source" on page 11. To adjust the computer image: 1 Press MENU. The on-screen menu opens with the PICTURE menu displayed. 2 Press or to highlight SETTINGS, then press . The SETTINGS menu opens. Parental Controls Menu Settings Time Closed Caption Input Labels Computer Settings Reset to Default PICTURE AUDIO CHANNELS SETTINGS 3 Press or to highlight Computer Settings, then press ENTER. The Computer Settings screen opens. 4 Press or to highlight an option, then press or to adjust the option. You can adjust: • Auto Adjust-Automatically adjusts the image settings such as position and phase • H.Position-Moves the image right or left • V.Position-Moves the image up or down • Clock-Adjusts the sample frequency • Phase-Adjusts the focus of stable images 5 Press MENU to return to the previous menu, or press EXIT to close the menu. Adjusting the sound Adjusting sound settings To adjust the sound: 1 Press MENU. The on-screen menu opens. Mode Brightness Contrast Color Tint Sharpness Advanced Video PICTURE AUDIO CHANNELS SETTINGS Energy Savings 48 57 70 0 6 2 Press or to highlight AUDIO, then press . The AUDIO menu opens. Mode Brightness Contrast Color Tint Sharpness Advanced Video PICTURE AUDIO CHANNELS SETTINGS Energy Savings 48 57 70 0 6 Sound Mode Treble Bass Balance Surround MTS/SAP Audio Language PICTURE AUDIO CHANNELS SETTINGS Standard 50 40 0 On Stereo English 3 Press or to highlight an option, then press or to adjust the option. You can select: