Dynex DX-26L100A13 User Manual (English) - Page 12
Connecting power, Connecting a cable or satellite box
View all Dynex DX-26L100A13 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
8 DX-26L100A13 Making connections Connecting power To connect the power: • Plug the AC power cord into an AC power outlet. Notes • • • Your TV should only be operated from the power source indicated on the label. Always unplug the AC power cord from the power outlet when you will not be using your TV for an extended period of time. The AC power cord is permanently attached to the back of your TV. Do not try to pull it out. Connecting a cable or satellite box Many cable or satellite TV boxes have more than one connection type. To get the best video, you should use the best connection type available. For more information, see "What connection should I use?" on page 7. Notes • • • • If the signal level for a channel is weak, the picture may be distorted. Adjust the antenna or use a highly directional outdoor or set-top antenna with a built-in amplifier. If the picture quality is good on some channels and poor on others, the problem may be caused by a poor or weak signal from the broadcaster or cable TV provider. If you connect to cable or satellite TV without a set-top box and experience poor picture quality, you may need to install a set-top box to improve signal reception and picture quality. Contact your cable or satellite TV provider about upgrading to a set-top box. Many high-definition (HD) channels upscale standard-definition (SD) content. The picture displayed on your TV is still displayed as SD, thus the picture quality will not be as clear or crisp as it would be if the content was originally recorded in HD. Using HDMI (best) To connect a cable or satellite box using HDMI: 1 Turn off your TV and all connected equipment. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box. 3 Connect an HDMI cable (not provided) to one of the HDMI jacks on the side of your TV and to the HDMI OUT jack on the cable or satellite box. Cable or satellite box 75 ohm coaxial cable HDMI cable Side of TV 4 Turn on your TV, then turn on the cable or satellite box. Note An HDMI cable carries both audio and video. You do not need to use any audio cables.