Dynex DX-26L100A13 Important Information (English) - Page 5

4 DX-26L100A13 Specifications Problem One or more channels do not display. Password is lost. Some settings cannot be accessed. TV cabinet creaks. Control buttons do not work. TV keeps turning off. Solution • Make sure that the channels are not blocked. See "Setting parental control levels." • Make sure that the channels are not hidden. The channel may have been deleted from the channel list. You can tune to the channel by pressing the number buttons or you can add the channel back to the channel list. See "Hiding channels" in the online User Guide. • If you are using a cable or satellite box, use the remote that came with that box to change channels. • Make sure you have the correct input selected to view channels from the cable or satellite box. • If you are using an antenna, the digital channel signal may be low. To check the digital channel signal strength, see "Checking the digital signal strength" in the online User Guide. • Enter 9999 to access parental controls, then set a new password. See "Setting or changing the password" in the online User Guide. • If a setting is grayed, the setting is not available in the current video input mode. • When the TV is in use, the temperature rises naturally and may cause the cabinet to expand or contract which can cause a creaking noise. This is not a malfunction. • Make sure that the Button Lock option is set to Off. See "Locking control buttons" in the online User Guide. • Unplug the power cord, wait a few seconds, then plug the cord back in and turn on your TV. • Make sure that the sleep timer is not turned on. See "Setting the sleep timer" in the online User Guide. Notes: • If the problem is not solved by using these troubleshooting instructions, turn off your TV, then turn it on again. • Additional troubleshooting information is in your online User Guide. Go to www.dynexproducts.com, click Support & Service, enter your model number in the Product Search field, then click Search. Specifications Specifications are subject to change without notice. Dimensions and weight Screen DX-26L100A13 Without stand: 4.1 x 26.2 x16.9 in.(10.36 x 66.44 x 42.84 cm) 14.52 lbs (6.6 kg) With stand: 7.9 x 26.2 x 18.4 in. (19.98 x 66.44 x 46.72 cm) 15.4 lbs (7.0 kg) DX-26L100A13 Screen size measured diagonally 26" Display type LCD Panel 60 Hz vs.120 Hz 60Hz Display resolution 720p Panel resolution 1366 (H) × 768 (V) Aspect ratio 16:9 Contrast ratio (typical)-panel 800:1 Dynamic contrast ratio-list value 1300:1 Brightness (center typical) cd/m2 250 nits DX-26L100A13 Comb filter Response time Horizontal viewing angle Vertical viewing angle 3d y/c digital 5 ms 140 140 Display resolutions/VGA scan rates Tuner DX-26L100A13 HDMI 1.3 Suggested Resolutions: 1080p, 1080i, 720p, 480p, 480i Component video Suggested Resolutions: 1080i, 720p, 480p, 480i PC/VGA Suggested scan rates: 640 × 480/60Hz, 800 × 600/60Hz, 1024 × 768/60Hz, 1360 × 768/60Hz Inputs Analog Digital DX-26L100A13 NTSC ATSC, 8-VSB, Clear-QAM Outputs DX-26L100A13 HDMI/DVI 3 (side) E-EDID compliant HDCP compliant DVI to HDMI1 only Component video 1 (side) Composite video 1 (side) Shared audio (component No and composite) S-Video No PC/VGA 1 (side) 3.5mm PC audio input 1 (side) USB 1 (side) Supports JPEG and firmware upgrade Audio Video Analog audio Digital audio WiFi Ethernet Headphone DX-26L100A13 No 1 (side) 1 Coaxial (side) No No 1 (side) DX-26L100A13 Watts/Channel 6W Number of Speakers 2 Power DX-26L100A13 Power consumption On: 75 W Standby: