Dynex DX-32L150A11 User Manual (English) - Page 33
Maintenance, Specifications, Legal notices - atsc
View all Dynex DX-32L150A11 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
30 DX-32L/37L/40L/46L Maintenance General Problem Solution One or more channels do not display. Password is lost. Some settings cannot be accessed. TV cabinet creaks. Control buttons on the TV do not work. • Make sure that the channels are not blocked. For more information, see "Setting parental control levels" on page 22. • Make sure that the channels are not hidden. For more information, see "Hiding channels" on page 18. • The channel may have been deleted from the channel list. You can tune to the channel by pressing the number buttons or you can add the channel back to the channel list. For more information, see "Changing channel settings" on page 17. • Enter 9999 to access parental controls, then set a new password. For more information, see "Setting parental controls" on page 20. • If a setting is grayed, the setting is not available in the current video input mode. • When the TV is in use, the temperature rises naturally and may cause the cabinet to expand or contract which can cause a creaking noise. This is not a malfunction. • Disconnect the power cord, wait a few seconds, then reconnect the power cord and turn on the TV. Note: If the problem is not solved by using these troubleshooting instructions, try turning off your TV, then turning it on again. Maintenance Cleaning • Clean your TV with a soft, dry cloth. If surfaces are extremely dirty, use a soft cloth dampened with a weak detergent solution. • Use an eyeglass cleaner to clean the screen. Never use alcohol, paint thinner, or benzine. • Before using a chemically treated cloth, read the instructions that came with the cloth. Specifications Specifications subject to change without notice. Weight and dimensions shown are approximate. TV type TV panel TV system LCD 32-inch TFT LCD 37-inch TFT LCD 40-inch TFT LCD 46-inch TFT LCD NTSC-M, ATSC Receiving channels Audio multiples Audio out Power requirement Power consumption Dimensions (W × H × D with stand) Weight Input terminals Output terminals Control terminals VHF: 2 - 13 UHF: 14 - 69 CATV: 1 - 125 CADTV: 1-135 DTV: 2-69 BTSC system 8 W x 2 (32") 10 W x 2 (37"/40"/46") AC 120 V, 60 Hz 98 W (32") 145 W (37") 185 W (40") 240 W (46") 30.5 × 21.5 × 8.3 inches (776 × 546 × 210 mm) - 32" 35.4 × 24.9 × 11 inches (899 × 632 × 280 mm) - 37" 38.4 × 26.4 × 11inches (976 × 670 × 280 mm) - 40" 43.7 × 29.7 × 11.8 inches (1110 × 756 × 300 mm) - 46" 23.15 lbs. (10.5 kg) - 32" 31.9 lbs. (14.5 kg) - 37" 44 lbs. (20 kg) - 40" 48.5 lbs. (22 kg) - 46" Composite video/L and R audio (2) S-Video (2) Component video/L and R audio (2) HDMI (3) VGA/audio (1) Antenna (1) Audio left and right (1) Digital optical (1) Headphone (1) SERVICE PORT (1) Legal notices FCC Part 15 This device complies with Part 15 of the FCC Rules. Operation of this product is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply within the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced technician for help.