Dynex DX-32LD150A11 User Manual (English) - Page 19
Understanding the basics - tv remote
View all Dynex DX-32LD150A11 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Understanding the basics DX-26LD150A11/DX-32LD150A11 15 5 Press OK/ENTER. The Choose your Picture Mode screen opens. Setup Wizard Choose your TV Picture Mode Home Mode Retail Mode Next Move Select ENTER Next MENU Previous 6 Press or to select Home mode or Retail mode, then press OK/ENTER to confirm. If you chose Home mode (default - has the same settings as the Energy Saving picture mode), the Choose your TV source screen opens. If you chose Retail mode (has the same settings as the Vivid picture mode), you will be asked whether you really want this mode, because no energy savings will be realized with your TV in this mode. Setup Wizard Are you sure you want Retail Mode? since in this mode Energy saving is not realized Yes No Next Move Select ENTER Next MENU Previous If you select No, press OK/ENTER. The Choose your TV Picture Mode screen reopens. Go back to Step 5. - OR - If you select Yes, press OK/ENTER. The Choose your TV source screen opens. Setup Wizard Choose your TV source Antenna Cable Cable/Satellite Box 0 Digital Channels 0 Analog Channels Move Select ENTER Next MENU Previous 7 Press or to select Antenna, Cable, or Cable/Satellite Box, depending on the type of connection you have, then press OK/ENTER. • If you are using an antenna for a standard or HD TV signal, select Antenna. • If your cable is connected directly to the TV (without a tuner box), select Cable. • If your cable is connected to your TV through a tuner box, select Cable/Satellite Box. If you selected Antenna or Cable, your TV automatically scans for available channels in your area and stores the channel information in the channel list. This may take several minutes. While scanning, the TV displays a progress report. - OR - If you selected Cable/Satellite Box, the auto scan is not necessary and will not appear. Notes: • During auto scan, digital programs will be scanned first, then analog programs. When all available digital programs have been searched, the screen will ask you to "Press EXIT if you don't need analog channel scan." At this point you can press EXIT to exit the analog channel scan, or just ignore it and the TV will go on scanning. • You can press EXIT at any time to stop the auto scan, but you will need to run the auto scan again to create a channel list. 8 Select the corresponding video input source through the INPUT SOURCE menu. Note: You can change the menu language or scan for channels at a later date. For more information, see "Selecting the menu language and transparency" on page 31 or "Automatically scanning for TV channels" on page 19. Understanding the basics Turning your TV/DVD combo on or off To turn your TV/DVD combo on or off (standby mode): 1 Plug the power cord into an AC power outlet. 2 Press (power). Your TV/DVD combo turns on. 3 Press again to turn off your TV/DVD combo. When you turn off your TV/DVD combo, it goes into standby mode. Warning: When your TV/DVD combo is in standby mode, it is still receiving power. To completely disconnect power, unplug the power cord. Note: If your TV/DVD combo does not detect a signal and you do not press any button for 15 minutes, your TV/DVD combo goes into Standby mode automatically. Selecting the video input source To select the video input source: 1 Turn on your TV/DVD combo, then press the INPUT key on the remote, or the INPUT button on the side of your TV/DVD combo. The INPUT SOURCE menu opens. INPUT SOURCE TV AV S-Video Component1 Component2 DVD HDMI1 HDMI2 HDMI3 VGA USB 2 Press INPUT repeatedly or press or to highlight the video source, then press OK/ENTER.