Dynex DX-40L150A11 Quick Setup Guide (English) - Page 1

Side buttons 40" LCD HDTV QUICK SETUP GUIDE DX-40L150A11 Installing the stand 1 Remove the stand from the box and place it on a table or bench. 2 Lay the TV on a flat, cushioned surface. 3 Align the stand with the TV, as shown. Connecting a DVD or Blu-ray DVD player, cable box, satellite receiver, or game station Using HDMI (best) Back of TV HDMI device HDMI cable (not included) Using component (better) Back of TV Component video device Component video cable Audio cable Remote control and 2 AAA batteries AC power cord L/R audio Component cable video cable TV stand and screws (4) 4 Secure the stand to the column with the four screws provided. Installing a wall-mount bracket 1 Lay your TV face down on a table or bench. Make sure that you put down a soft cushion or cloth so that your TV is not scratched. 2 Remove the four screws that secure the TV to the base, then remove the base. 3 Remove the four screws holding the stand bracket to the TV, then remove the stand bracket. Note: Cables are often color-coded to connectors. Connect yellow to yellow, red to red, and white to white. Using S-video (fair) Back of TV VCR S-Video cable Audio cable 4 Secure the wall-mount bracket to the back of your TV using the screws provided with the wall-mount bracket. 200 mm M6 screws 200 mm Using composite (fair) Back of TV Game console Setting up your remote control 1 Press down on the battery compartment cover lock, then remove the remote control cover. Side of TV Camcorder Connecting an antenna Wall jack 75-Ohm coaxial cable Back of TV Cable box or satellite receiver HDMI cable Video or S-Video cable Component cable Connecting a home theater system Using an analog audio cable: Back of TV Audio amplifier Audio cable Note: Cable connectors and jacks are often color-coded. Match the colors when you connect the AV cable. Using a digital audio cable: Back of TV Digital sound system Digital optical cable Note: The DIGITAL OUTPUT jack only works with digital TV channels. Connecting a computer Back of TV Quick Setup Guide 2 Insert two AAA batteries into the battery compartment. Make sure that the + and - symbols on the batteries match the + and - symbols in the battery compartment. 3 Replace the cover. Make sure that the lock snaps into place. To program your existing remote control to work with your Dynex TV, see the table below for common codes. If you have problems programming your remote, or need a different remote control code, visit www.dynexproducts.com for the latest remote control code information. Universal remote control TV codes (for all Dynex TVs manufactured after Jan. 1, 2007) Universal remote control makers and models Philips PHDVD5, PH5DSS, PMDVR8, PDVR8 RCA RCU807 One for All URC-6690 Sony RM-VL600 115 135 0464 8043 Comcast M1057 0463 Set-top box makers and models Dish Network Motorola VIP508, VIP622 DRC800 TIVO Series 3, HD 720 0463 0091 DirectTV RC23 10463 AV cable Back of TV VCR AV cable Audio cable Audio cable VGA cable Computer