Dynex DX-40L150A11 User Manual (English) - Page 7
Installing and removing the, stand - table top base tv stand
View all Dynex DX-40L150A11 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
4 DX-40L150A11 Installing and removing the stand Installing and removing the stand You must install your TV into the stand in order for it to stand upright on a cabinet or other flat surface. If you intend to mount your TV on a wall or other vertical surface, you must remove the stand column. Cautions • Read these instructions carefully before you try to assemble the stand or remove the stand column. • Make sure that you handle the TV carefully when attempting to assemble or remove the stand. If you are not sure of your ability to do this, contact a professional installer or service technician. Dynex is not responsible for any damages or injuries that occur because of mishandling or incorrect assembly. • Use a soft cushion or covering to prevent scratching or damage to the TV screen or cabinet. • Before assembly or removal of the stand, unplug the power cord. Installing the stand To install the stand: 1 Remove the stand from the box and place it on a table or bench. 2 Lay the TV on a flat, cushioned surface. 3 Align the stand with the TV, as shown in the following illustration. 3 Remove the four screws holding the stand bracket to the TV, then remove the stand bracket. 4 Secure the wall-mount bracket to the back of your TV using four M6 screws (not provided). Caution: You must be mindful of the length of the screws used to mount the wall mount bracket to the back of your TV. The screws must be 10-12 mm in length. Using shorter screws could result in an insecure mount. Using longer screws could cause a space between the wall mount bracket and the TV. 200 mm M6 screws 200 mm 4 Secure the stand to the column with the four screws provided. Installing a wall-mount bracket To install a wall-mount bracket: 1 Lay your TV face down on a table or bench. Make sure that you put down a soft cushion or cloth so that your TV is not scratched. 2 Remove the four screws that secure the TV to the base, then remove the base.