Dynex DX-7HTV-09 User Manual (English) - Page 4

4 OSD menu OSD menu To access the OSD menu: 1 Press MENU on the remote control. 2 Press the to select a setting, then press ENTER. 3 Press MENU to exit. Clock menu OSD Duration Sleep Timer Time zone (DTV only) Daylight savings time (DTV only) Set the duration of the on-screen display: 5, 10, 15, or 20 seconds Set to turn the TV off automatically: 5, 10, 15, 30, 45, 60, 90, 120, 180, 240 minutes, or OFF Select your time zone Turn Daylight Savings On or Off Setup menu Language Transparent Closed Caption (DTV only) Zoom Mode Restore Setting Select English, Spanish, or French Make the menu transparent Select a closed caption option Select Auto, Wide, Zoom, or Cinema Reset settings to factory default Channel setup menu (TV only) Antenna Auto Scan Auto Scan Add CH Channel Skip Channel NO Channel Label Select a reception method: Air or CATV (cable) Perform a channel scan to save to memory. Erases previously saved channel information. Perform a channel scan to save to memory without erasing previously saved channel information. Set the TV to skip specific channels found during auto scan. Changes the channel, while in Menu mode. Lets you edit the program label that appears when a channel is selected. DTV automatically adds this information. You can manually edit it for ATV. WARNING: The TV will not work when it is moving. Setting up the TV Connecting power To connect power: 1 Plug into one end of the power adapter into the DC Input jack on the right side of the TV. 2 Connect the other end into a power outlet. 3 Troubleshooting Charging the battery The TV has a built-in rechargeable battery (Lithium-Polymer). The TV can operate up to 100 minutes with the built-in battery. Charge the battery prior to first use. Recharge the battery when the built-in battery fails to power the TV and when the sound level lowers or the picture becomes unstable. NOTE: The battery will not charge when using the car power adapter. To charge the battery: 1 Connect one end of the AC to the DC Input jack on the right side of the TV. 2 Connect the other end to a power outlet. 3 Press POWER on the TV to turn the TV off. The charge indicator turns red. 4 Disconnect the AC when the charge indicator turns off. Scanning for channels Scan for available analog and digital channels to create the channel list using the CH+ and CH- buttons. To scan for channels: 1 Press POWER on the TV to turn on your TV. 2 Press INPUT to set the input mode to TV. 3 Press MENU. The MENU screen opens. 4 Press twice to access the Channel Setup menu. 5 Press to select AutoScan. The TV beings to scan for available channels. Pause the scan by pressing and holding MENU. 6 Press MENU to exit the menu when the scan is complete. Selecting analog or digital channels You can select specific analog or digital TV stations using your remote control. To select an analog station: • Enter the channel number followed by -0 (for example 11-0 for analog channel 11). If available, the analog channel is displayed. To select a digital station: • Enter the channel number followed by -1 (for example 11-1 for digital channel 11). If available, the digital channel is displayed. NOTE: Some digital stations provide multiple broadcasts on a single channel. To access these channels directly enter higher numbers after the channel number (for example 11-2 or 11-3. for digital channel 11). If available, the digital channels appear. Connecting an A/V device You can connect your TV to an A/V device such as a VCR or DVD player to enjoy high quality stereo sound and picture. To connect an A/V device: 1 Connect the black end of the supplied audio/video cable to the AV In jack on the right side of the TV. 2 Connect the other end of the cable to the AV OUTPUT jacks on the A/V device, making sure to match the color coding. 3 Press INPUT and choose AV IN.