Dynex DX-AC500 Quick Setup Guide - Page 1

DX-AC500 500mA Universal AC Adapter Adaptateur c.a. universel de 500 mA Adaptador universal de CA de 500 mA Package contents • 500mA universal AC adapter • Quick Setup Guide Getting started 1 Set the voltage selector switch to the proper setting for your device. Refer to the device's user manual for the correct voltage requirement, or determine the voltage by multiplying the number of batteries required by 1.5. (Example: 4 batteries × 1.5=6 volts) Note: A device's voltage setting may also be found next to the DC jack or on a device information plate. 2 Select the adapter plug tip that best fits the device. 3 Insert the correct adapter plug tip into the AC adapter connector. 4 Connect the adapter plug tip into the DC jack of your device. 5 Plug the AC adapter into a 110/120V standard electrical outlet and operate and use the device as usual. Important: This adapter is intended to be correctly oriented in a vertical or floor mount position. 6 If your device does not work, immediately unplug the AC adapter and recheck the instructions carefully, particularly the voltage and polarity setting. Cautions • Never attempt to power a device for which the voltage or polarity is unknown. Improper voltage or polarity settings may result in severe damage to the device or AC adapter. • This adapter should never be used with any device that requires more than 500mA of current. • Disconnect the AC adapter from the electrical outlet when not in use. Specifications Input voltage: AC120V 60Hz Input plug: Two flat pinsɼplugs into standard AC power outlet to provide power to your portable device. Output voltage: 3, 4.5, 6, 7.5, 9 and 12V DC Output current: 500mA Output plug: 6 detachable plugs: 2.35 × 0.75 mm; 4.8 × 1.7 mm 3.5 × 1.35 mm; 5.5 × 2.1 mm; 4 × 1.7 mm; 5.5 × 2.5 mm; Adapter plug tips allow a variety of devices to be powered up to 500mA. One-year limited warranty Visit www.dynexproducts.com for details. © 2010 BBY Solutions, Inc. All Rights Reserved. DYNEX is a trademark of BBY Solutions, Inc. Registered in some countries. All other products and brand names are trademarks of their respective owners. Contenu de l'emballage • Adaptateur c.a. universel de 500 mA • Guide d'installation rapide Mise en service 1 Régler le commutateur de tension sur la tension requise par l'appareil. Voir le guide de l'utilisateur pour déterminer la tension requise, sinon obtenir la tension en multipliant le nombre de piles utilisées par 1,5 (exemple : 4 piles × 1,5 = 6 V) Remarque : La tension requise par l'appareil est également indiquée à côté de la prise c.c. ou sur la plaque signalétique. 2 Sélectionner l'embout pour l'adaptateur correspondant à la prise de l'appareil. 3 Insérer l'embout pour l'adaptateur dans le connecteur c.a. de l'adaptateur. 4 Connecter l'embout pour l'adaptateur à une prise c.c. de l'appareil. Quick Setup Guide / Guide d'installation rapide / Guía de instalación rápida