Dynex DX-DVD2 User Manual (English) - Page 20
Troubleshooting - remote battery
UPC - 600603125102
View all Dynex DX-DVD2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
20 DX-DVD2 • Disc Menu-Lets you set the preferred menu language as the default when playing DVD. (If the DVD supports the language). • Default-Resets to all the manufacturer's original settings for this DVD player Press OK to perform the reset. 4 Press (Left) to return to the previous menu. 5 Press SETUP to exit the on-screen menus. Troubleshooting Check the following guide for the possible causes and solutions for a problem before contacting the nearest service center or dealer for repairs. 14 Symptom Solution No power Make sure that the DVD player is plugged in and that the AC power connection is secure. No picture • Make sure that the connection between the DVD player and the TV is secure. • Make sure that the TV is in good working condition. No sound • Make sure that the connection between the player and other devices is secure. • Make sure that the TV and amplifier are in good working condition and setup correctly. DVD will not play • Make sure that the disc is correctly inserted. • Clean the disc. The remote control does not • Remove obstacles between the remote control and the player. work • Aim the remote control at the sensor on the front panel of the player. • Check the battery and replace it if necessary. Picture is distorted • Check the disc for dirt and scratches. Clean or replace the disc. • Unplug the player, wait ten seconds, then plug it back in and turn it on. The control buttons on the • Power surges or other electrical phenomena may have disabled the buttons. player do not work • Unplug the player, wait ten seconds, then plug it back in and turn it on.