Dynex DX-ECFW User Manual (English) - Page 6

Troubleshooting - problems

Page 6 highlights

6 Troubleshooting Troubleshooting Windows Device Manager does not • Repeat the driver installation procedures, show the IEEE 1394 Bus host then see if the device appears in Device controllers or the OHCI Compliant Manager. IEEE 1394 Host Controller • The computer's operating system version may need to be updated to support IEEE 1394 devices. Refer to the Windows or Apple Web site to update the computer to the latest OS version or service pack. Camera and camcorder connecting • Check the Device Manager to see if the problems DV camera is detected and installed. If the DV camera is connected to the FireWire ExpressCard adapter, the Device Manager should display Microsoft DV camera and VCR under Imaging Device in the Control Panel. • If these entries are not present, the camera may not connect to the FireWire ExpressCard adapter correctly. Check the cable connections to both the camera and adapter. Make sure that the camera is turned on and working. • The computer's operating system version may need to be updated to support IEEE-1394 devices. Refer to either Windows or Apple Web sites to update the computer to the latest OS version or service pack.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16

6
Troubleshooting
Troubleshooting
Windows Device Manager does not
show the IEEE 1394 Bus host
controllers or the OHCI Compliant
IEEE 1394 Host Controller
Repeat the driver installation procedures,
then see if the device appears in Device
Manager.
The computer’s operating system version
may need to be updated to support
IEEE 1394 devices. Refer to the Windows
or Apple Web site to update the
computer to the latest OS version or
service pack.
Camera and camcorder connecting
problems
Check the Device Manager to see if the
DV camera is detected and installed. If
the DV camera is connected to the
FireWire ExpressCard adapter, the Device
Manager should display
Microsoft DV
camera and VCR
under
Imaging
Device
in the
Control Panel
.
If these entries are not present, the
camera may not connect to the FireWire
ExpressCard adapter correctly. Check the
cable connections to both the camera
and adapter. Make sure that the camera
is turned on and working.
The computer’s operating system version
may need to be updated to support
IEEE-1394 devices. Refer to either
Windows or Apple Web sites to update
the computer to the latest OS version or
service pack.