EVGA iX58 User Guide - Page 25
Connecting Serial ATA Cables
UPC - 843368010782
View all EVGA iX58 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Connecting Serial ATA Cables The Serial ATA II connector is used to connect the Serial ATA II device to the motherboard. These connectors support the thin Serial ATA II cables for primary storage devices. The current Serial ATA II interface allows up to 300MB/s data transfer rate. There are nine (9) internal serial ATA connectors and one (1) e-SATA on this motherboard. Connection points SATA0 - SATA5, are controlled by the South Bridge Chipset. Connection points SATA8 - SATA9, are controlled by the JMicron JMB363 chip. These connection points support RAID 0, RAID 1, RAID 5, RAID 0+1 and JBOD configurations. SATA6 and SATA7 are controlled by the JMicron JMB362 chip. SATA 5 SATA 4 RX- TX- RX+ TX+ GND GND GND SATA 2 (bottom) SATA 0 (bottom) SATA 8 (bottom) SATA 3 (top) SATA 1 (top) SATA 9 (top) Connect the locking cable end to the motherboard connector. Connect the end without the lock to the SATA device. SATA 7 SATA 6 (e-SATA)