EdgeStar AP12000S Owner's Manual - Page 10
Attaching the duct, connectors to the exhaust - 1 exhaust hose
View all EdgeStar AP12000S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Attaching the duct connectors to the exhaust hose A. B. 5. Attach the connectors to the hose: A. Extend the ends of the exhaust hose B. Thread the duct connector on by turning it clockwise until it stops. 6. Roll the unit towards the window kit. Leave a space that is at least 20 inches to the wall. 7
7
Attaching the duct
connectors to the exhaust
hose
A.
B.
5. Attach the connectors to the hose:
A. Extend the ends of the exhaust hose
B. Thread the duct connector on by turning it clockwise until
it stops.
6. Roll the unit towards the window kit. Leave a space that
is at least 20 inches to the wall.