EdgeStar AP12005ECO Owner's Manual - Page 16

Fan Only Mode, Automatic Mode, Fan Speed, Clock

Get EdgeStar AP12005ECO PDF manuals and user guides View all EdgeStar AP12005ECO manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

Fan Only Mode NOTE: Fan Only mode does not require that the exhaust hose be attached. Automatic Mode Fan Speed Clock TIP: Use the Chart below: 12-Hour 24-Hour 1:00 PM 13:00 2:00 PM 14:00 3:00 PM 15:00 4:00 PM 16:00 5:00 PM 17:00 6:00 PM 18:00 7:00 PM 19:00 8:00 PM 20:00 9:00 PM 21:00 10:00 PM 22:00 11:00 PM 23:00 12:00 AM 00:00 Fan Only mode is used to circulate the air in your room. No temperature setting is needed. The front panel lights will be green. To operate the unit in Fan Only mode: 1) Make sure the power cord is plugged into a power outlet. 2) Press the Power button on the remote control. 3) Press the Mode button until the Fan Only indicator is selected. 4) Press the Speed button to select the fan speed. You can choose between Automatic, High, Medium and Low. In Automatic mode, the unit will cool, dehumidify, or heat (some models) depending on the ambient temperature. As the temperature in the room changes, the mode and fan speed will change automatically. The front panel lights will change depending on the mode. To operate the unit in Automatic mode: 1) Make sure the power cord is plugged into a power outlet. 2) Press the Power button on the remote control. 3) Press the Mode button until the Automatic indicator is selected. The Fan Speed button is used to change the fan speed while in Cooling and Fan Only modes. Press the Fan Speed button to select the fan speed. The Automatic, High, Medium or Low indicator can be selected. Note: You will not be able to change the fan speed if the unit is in Automatic or Dehumidify mode. The Clock button is used to set the Clock. To set the Clock: 1) Press and hold the Clock button until the Clock indicator starts blinking. 2) Set the time by using the Up and Down buttons. Holding down the buttons longer than 1 second will change the time in fast mode. The clock is a 24-Hour clock so if it is 6:00 PM you would set the time to be 18:00. 3) To save your settings press and hold the Clock button until the Clock indicator stops blinking. 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
13
Fan Only mode is used to circulate the air in your room. No temperature
setting is needed. The front panel lights will be green.
To operate the unit in Fan Only mode:
1) Make sure the power cord is plugged into a power outlet.
2) Press the
Power button on the remote control.
3) Press the
Mode button until the
Fan Only indicator is selected.
4) Press the
Speed button to select the fan speed. You can choose
between
Automatic,
High,
Medium and
Low.
In Automatic mode, the unit will cool, dehumidify, or heat (some models)
depending on the ambient temperature. As the temperature in the room
changes, the mode and fan speed will change automatically. The front
panel lights will change depending on the mode.
To operate the unit in Automatic mode:
1) Make sure the power cord is plugged into a power outlet.
2) Press the
Power button on the remote control.
3) Press the
Mode button until the
Automatic indicator is
selected.
The
Fan Speed button is used to change the fan speed while in
Cooling and Fan Only modes.
Press the
Fan Speed button to select the fan speed. The
Automatic,
High,
Medium or
Low indicator can be selected.
Note: You will not be able to change the fan speed if the unit is in
Automatic or Dehumidify mode.
The
Clock button is used to set the Clock.
To set the Clock:
1) Press and hold the
Clock button until the Clock indicator starts
blinking.
2) Set the time by using the
Up and
Down buttons. Holding
down the buttons longer than 1 second will change the time in fast mode.
The clock is a 24-Hour clock so if it is 6:00 PM you would set the time to
be 18:00.
3) To save your settings press and hold the
Clock button until the
Clock indicator stops blinking.
Fan Only Mode
Automatic Mode
Fan Speed
Clock
NOTE: Fan Only mode does
not require that the exhaust
hose be attached.
TIP: Use the Chart below:
12-Hour
24-Hour
1:00 PM
2:00 PM
3:00 PM
4:00 PM
5:00 PM
6:00 PM
7:00 PM
8:00 PM
9:00 PM
10:00 PM
11:00 PM
12:00 AM
13:00
14:00
15:00
16:00
17:00
18:00
19:00
20:00
21:00
22:00
23:00
00:00