EdgeStar AP14000HS Owner's Manual - Page 18

Operating the Remote Control

Get EdgeStar AP14000HS PDF manuals and user guides View all EdgeStar AP14000HS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 18 highlights

Operating the Remote Control Power Use the and off. Power button to turn the portable air conditioner on By default when you first use the power button, the unit will begin to operate in cooling mode. The unit will remember the last used mode/settings if you shut down and restart. Auto-Restart: If power to the unit is interrupted, the air conditioner will restart itself in its last used mode/settings once power is restored. The compressor will restart after 3 minutes. Cooling Mode Cooling mode cools and dehumidifies the air. If the ambient temperature drops below the temperature you selected, the compressor turns off and the unit functions with the fan only. When the temperature rises above the temperature you selected, the compressor turns on again. Whether your desired temperature can actually be reached depends on the ambient conditions. The room temperature remaining above the set temperature is normal. NOTE: The exhaust hose must be used in Cooling mode in order to cool a room. To operate the unit in cooling mode: 1) Make sure the power cord is plugged into a power outlet. 2) Press the Power button on the remote control. 3) Press the Mode button until the cooling indicator is selected. 4) Select the fan speed by using the Speed button. 5) Change the set temperature by using the Up and Down buttons. The temperature is adjustable between 61°F - 89°F in one degree increments. You can switch between Fahrenheit and Celsius by pressing the button. Dehumidifying Mode During the Dehumidifying mode, the unit will condense water out of the air and exhaust it through the exhaust hose. In high humidity conditions, you may need to manually drain the unit. The ambient temperature in the room will probably drop by a few degrees while using the Dehumidifying mode. To operate the unit in dehumidifying mode: 1) Make sure the power cord is plugged into a power outlet. 2) Press the Power button on the remote control. 3) Press the selected. Mode button until the dehumidify indicator is NOTES: If the room temperature is below 77ºF, the fan will always run on low speed while in the Dehumidifying mode. If you do not use the exhaust hose in Dehumidifying mode, you must manually drain the water from the unit. Additionally, the ambient temperature in the room will probably rise by a few degrees if you do not use the exhaust hose. You will not be able to change the thermostat temperature while in Dehumidifying Mode. 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
15
Operating the Remote Control
Use the
Power button to turn the portable air conditioner on
and off.
By default when you first use the power button, the unit will begin to
operate in cooling mode. The unit will remember the last used
mode/settings if you shut down and restart.
Auto-Restart
:
If power to the unit is interrupted, the air conditioner will
restart itself in its last used mode/settings once power is restored. The
compressor will restart after 3 minutes.
Cooling mode cools and dehumidifies the air. If the ambient temperature
drops below the temperature you selected, the compressor turns off and
the unit functions with the fan only. When the temperature rises above the
temperature you selected, the compressor turns on again.
Whether your desired temperature can actually be reached depends on
the ambient conditions. The room temperature remaining above the set
temperature is normal.
To operate the unit in cooling mode:
1) Make sure the power cord is plugged into a power outlet.
2) Press the
Power button on the remote control.
3) Press the
Mode button until the
cooling indicator is selected.
4) Select the fan speed by using the
Speed button.
5) Change the set temperature by using the
Up and
Down
buttons. The temperature is adjustable between 61°F - 89°F in one
degree increments. You can switch between Fahrenheit and Celsius by
pressing the
button.
During the Dehumidifying mode, the unit will condense water out of the air
and exhaust it through the exhaust hose. In high humidity conditions, you
may need to manually drain the unit. The ambient temperature in the
room will probably drop by a few degrees while using the Dehumidifying
mode.
To operate the unit in dehumidifying mode:
1) Make sure the power cord is plugged into a power outlet.
2) Press the
Power button on the remote control.
3) Press the
Mode button until the
dehumidify indicator is
selected.
Power
Cooling Mode
Dehumidifying Mode
NOTE: The exhaust hose
must be used in Cooling
mode in order to cool a room.
NOTES: If the room temperature is below 77ºF, the fan will always run on low speed while in the
Dehumidifying mode. If you do not use the exhaust hose in Dehumidifying mode, you must manually drain
the water from the unit. Additionally, the ambient temperature in the room will probably rise by a few
degrees if you do not use the exhaust hose. You will not be able to change the thermostat temperature
while in Dehumidifying Mode.