EdgeStar BR7000SS Owner's Manual - Page 10

Important Note: • Please refer to the dispense kit installation guide to complete the full assembly of the kegerator. Free-Standing Installation A free-standing installation will allow you to install the kegerator in almost any place you desire. Please follow the safety information referenced on the Important Safety Information page in this manual. Top Cover Installation The included stainless steel top cover is an optional accessory for use with your kegerator. The purpose of the top cover is to add a layer of protection from scratches to the main cabinet. The top cover will use the four installation pegs to hold into place. 1. Place the cover on the top of the cabinet. 2. Align the hole openings of the top cover to that of the cabinet. 3. Twist in the four installation pegs on the outer edges of the cover until tight. Guard Rail The guard rail helps to hold glasses on the top of the cabinet in order to avoid spills or broken glass. 1. Insert the four installation pegs on the outer edges of the top of cabinet. These may already be in place if you have installed the top cover. 2. Place the guard rail onto the four installation pegs. You may need to push down on the guard rail to ensure the rail has clicked into place on the pegs. 3. Screw the four small guard rail screws into the guard rail. This will lock the rail into position. Drip Tray The drip tray is a reservoir to collect any runoff liquid from overfilled glasses, leaking faucets, or spills. There are two pieces included for this tray. Place it on top of the cabinet and position under the faucet. 7