EdgeStar CRF150SS Owner's Manual - Page 2

INSTALLATION AND OPERATION Place your appliance in a location that is strong enough to support its total weight, keeping in mind that it will weigh substantially more when fully loaded than when empty. In order to prevent vibration and noise, the refrigerator should be leveled by adjusting the front leveling legs. Please note that this appliance is designed for "free-standing" use only. Choose a well ventilated location with at least 2-3 inches of clearance around the appliance. Locate the appliance out of direct sunlight and away from heat sources such as an oven or boiler. For your safety, please read the following information Warning: This appliance must be installed on a circuit that is grounded. Operation Before plugging in your refrigerator for the first time remove all packaging, clean the refrigerator with a soft rag and a mixture of lukewarm water and baking soda (2 tablespoons baking soda in 1 quart of water works well) . Wipe dry with soft cloth. Temperature Control The temperature in the appliance is controlled by 2